-
About everything
- Characteristics
- Description
- Photo / Video(5/0)
- Accessories / Spare parts
-
Technical specifications
| Connection type |
to the water supply |
| Cooling system |
water |
| Hopper capacity, kg |
60 |
| Power, W |
850 |
| Productivity, kg/day |
100 |
| Type of ice |
cubic |
| Overall dimensions (L x W x H), mm |
735x603x1007 |
| Weight, кг |
74.00 |
| Coolant |
R452A |
| Ice mass, g |
14 - 17 - 32 - 41 |
| Water temperature, °C |
+15 |
| Water temperature (min/max), °C |
+3/+32 |
| Water consumption, l/kg |
14.2 |
| Ambient temperature (min/max), °C |
+10/+43 |
| Execution |
stainless steel |
| Ambient temperature, °C |
+21 |
| Water inlet pressure (min/max), bar |
1/6 |
All characteristics
Description. NTF-SL260W Cube Ice Maker
Ice cube maker NTF-SL260W. The NTF SL series models are ideal for built-in bar counters thanks to the possibility of full front service and water cooling. The system is water-cooled and requires no side or rear air supply. The ability to integrate an ice maker is crucial in bars where every centimeter counts. In this case, a water-cooled ice maker is ideal. Ice makers operate on a fairly simple principle. Clean drinking water enters a storage tank and, using a built-in pump, is sprayed through a series of nozzles onto the evaporator, where ice begins to accumulate. Once the ice has filled the entire cooled form, defrosting occurs under the influence of hot refrigerant vapor. The resulting ice cubes fall into the storage bin. The ice maker's bin is always guaranteed to contain the correct amount of cubed ice for the specific model. Just a few scoops from the bin are removed, and the system switches to "freezing" mode. Ice maker designers developed a special technology (a "sprayer" system) that controls the nozzles using a thermostat and timer. This system also makes it possible to easily replace injectors if necessary, which helps avoid the usual problems associated with the formation of limescale deposits on them during operation. Successful operation of ice generators doesn't require any special technical skills. The main thing is proper and professional installation. Installation involves a single-phase AC power connection, a connection to the water supply (with water pressure from 0.1 to 0.6 MPa), and a sewer line. It is recommended to operate the units within an ambient temperature range of +10 to +43°C and a supply water temperature of +3 to +32°C. ...
Read in full
|
|
Photos. NTF-SL260W Cube Ice Maker
Accessories for NTF-SL260W Cube Ice Maker
: 99670
Buy
in stock
Water softeners Frosty DVA 8 regenerable. The water softening process extends the life of connected equipment, thereby eliminating unnecessary costs and hassle. The water softener filter operates on the principle of ion exchange of hardness salts (calcium) for sodium ions. Along with the water, hard..
: 55711
Buy
in stock
Water softeners Frosty DVA 12 regenerable. The water softening process extends the life of connected equipment, thereby eliminating unnecessary costs and hassle. The water softener filter operates on the principle of ion exchange of hardness salts (calcium) for sodium ions. Along with the water, har..
: 73124
Buy
in stock
Frosty DVA 16 regenerable water softeners The water softening process extends the life of connected equipment, thereby eliminating unnecessary costs and hassle. The water softener filter operates on the principle of ion exchange of hardness salts (calcium) for sodium ions. Along with the water, hard..
: 78795
Buy
in stock
GoodFood CMA LT 8 Water Softener Filter The water softening process extends the life of connected equipment, thereby eliminating unnecessary costs and hassle. The water softener filter operates on the principle of ion exchange of hardness salts (calcium) for sodium ions. Along with the water, hardne..
|
Spare parts for NTF-SL260W Cube Ice Maker
: 69514
Order
made to order
Pump suitable for Brema, Electrolux, NTF, Mastro, Alpeninox, Everlasting, and Zanussi NTF: SL140, SL180, SL200, SL260 Technical specifications: manufacturer = REBO type = NR50 power = 60 W voltage = 230 V frequency = 50 Hz outlet diameter = 12 mm length = 110 mm direction of rotation = left..
: 67622
Buy
in stock
Sensor diameter: 2 mm Sensor length: - mm Capillary tube length: 2000 mm Type: K22L1082 Evaporator thermostat -22 °C..-3°C RANCO K22L1082 for ice makers: BREMA: C150, C150-CubeA, C300, C300-CubeA, C300Split, C80, C80-CubeA, CB1265, CB1265-CubeA, CB134, CB1565, CB1565-CubeA, CB184, CB246, CB246-CubeA..
|
-
Technical specifications. NTF-SL260W Cube Ice Maker
| Connection type |
to the water supply
|
| Cooling system |
water
|
| Hopper capacity, kg |
60
|
| Power, W |
850
|
| Productivity, kg/day |
100
|
| Type of ice |
cubic
|
| Overall dimensions (L x W x H), mm |
735x603x1007
|
| Weight, кг |
74.00
|
| Coolant |
R452A
|
| Ice mass, g |
14 - 17 - 32 - 41
|
| Water temperature, °C |
+15
|
| Water temperature (min/max), °C |
+3/+32
|
| Water consumption, l/kg |
14.2
|
| Ambient temperature (min/max), °C |
+10/+43
|
| Execution |
stainless steel
|
| Ambient temperature, °C |
+21
|
| Water inlet pressure (min/max), bar |
1/6
|
|
|
-
Description. NTF-SL260W Cube Ice Maker
Ice cube maker NTF-SL260W. 
The NTF SL series models are ideal for built-in bar counters thanks to the possibility of full front service and water cooling.
The system is water-cooled and requires no side or rear air supply. The ability to integrate an ice maker is crucial in bars where every centimeter counts. In this case, a water-cooled ice maker is ideal.
Ice makers operate on a fairly simple principle. Clean drinking water enters a storage tank and, using a built-in pump, is sprayed through a series of nozzles onto the evaporator, where ice begins to accumulate. Once the ice has filled the entire cooled form, defrosting occurs under the influence of hot refrigerant vapor. The resulting ice cubes fall into the storage bin. The ice maker's bin is always guaranteed to contain the correct amount of cubed ice for the specific model. Just a few scoops from the bin are removed, and the system switches to "freezing" mode. Ice maker designers developed a special technology (a "sprayer" system) that controls the nozzles using a thermostat and timer.
This system also makes it possible to easily replace injectors if necessary, which helps avoid the usual problems associated with the formation of limescale deposits on them during operation.
Successful operation of ice generators doesn't require any special technical skills. The main thing is proper and professional installation. Installation involves a single-phase AC power connection, a connection to the water supply (with water pressure from 0.1 to 0.6 MPa), and a sewer line. It is recommended to operate the units within an ambient temperature range of +10 to +43°C and a supply water temperature of +3 to +32°C.
Included. NTF-SL260W Cube Ice Maker
- apparatus
- water supply and drain hose
- package
- passport instructions
- certificate
- warranty - 12 months.
Buy NTF-SL260W Cube Ice Maker by price 90550 грн
text_desc_seo_2
text_desc_seo_3
text_desc_seo_4
Our many years of experience and professionalism have earned us an excellent reputation in the Ukrainian food equipment market. Our competitive prices and product quality will delight you! Happy shopping.
-
Фотографии. NTF-SL260W Cube Ice Maker
-
Accessories for NTF-SL260W Cube Ice Maker
: 99670
Buy
in stock
Water softeners Frosty DVA 8 regenerable. The water softening process extends the life of connected equipment, thereby eliminating unnecessary costs and hassle. The water softener filter operates on the principle of ion exchange of hardness salts (calcium) for sodium ions. Along with the water, hard..
: 55711
Buy
in stock
Water softeners Frosty DVA 12 regenerable. The water softening process extends the life of connected equipment, thereby eliminating unnecessary costs and hassle. The water softener filter operates on the principle of ion exchange of hardness salts (calcium) for sodium ions. Along with the water, har..
: 73124
Buy
in stock
Frosty DVA 16 regenerable water softeners The water softening process extends the life of connected equipment, thereby eliminating unnecessary costs and hassle. The water softener filter operates on the principle of ion exchange of hardness salts (calcium) for sodium ions. Along with the water, hard..
: 78795
Buy
in stock
GoodFood CMA LT 8 Water Softener Filter The water softening process extends the life of connected equipment, thereby eliminating unnecessary costs and hassle. The water softener filter operates on the principle of ion exchange of hardness salts (calcium) for sodium ions. Along with the water, hardne..
|
Spare parts for NTF-SL260W Cube Ice Maker
: 69514
Order
made to order
Pump suitable for Brema, Electrolux, NTF, Mastro, Alpeninox, Everlasting, and Zanussi NTF: SL140, SL180, SL200, SL260 Technical specifications: manufacturer = REBO type = NR50 power = 60 W voltage = 230 V frequency = 50 Hz outlet diameter = 12 mm length = 110 mm direction of rotation = left..
: 67622
Buy
in stock
Sensor diameter: 2 mm Sensor length: - mm Capillary tube length: 2000 mm Type: K22L1082 Evaporator thermostat -22 °C..-3°C RANCO K22L1082 for ice makers: BREMA: C150, C150-CubeA, C300, C300-CubeA, C300Split, C80, C80-CubeA, CB1265, CB1265-CubeA, CB134, CB1565, CB1565-CubeA, CB184, CB246, CB246-CubeA..
|
|
