-
About everything
- Characteristics
- Description
- Photo / Video(2/2)
- Accessories / Spare parts
-
Technical specifications
| Connection type |
to the water supply |
| Cooling system |
air |
| Hopper capacity, kg |
25 |
| Power, W |
450 |
| Productivity, kg/day |
48 |
| Type of ice |
cubic |
| Overall dimensions (L x W x H), mm |
500x580x800 |
| Weight, кг |
56.00 |
| Water consumption, l/kg |
4 |
| Ambient temperature (min/max), °C |
+10/+43 |
| Ambient temperature, °C |
+21 |
| Coolant |
R290 |
| Water inlet pressure (min/max), bar |
1/6 |
| Water temperature, °C |
+15 |
| Execution |
stainless steel |
| Ice mass, g |
18 |
| Water temperature (min/max), °C |
+3/+32 |
All characteristics
Description. Brema CB425AHC Cube Ice Maker
Brema cube ice maker. SV series models are ideal for built-in installation under a bar counter thanks to their full front accessibility. However, when purchasing an ice maker, remember that the countertop height is typically 850-900 mm, meaning the unit installed under the bar counter should not exceed this height. Otherwise, you'll need to either order a higher countertop or choose a model with lower capacity. Brema ice makers operate on a simple principle. Clean drinking water enters a storage tank and, using a built-in pump, is sprayed through a series of nozzles onto the evaporator, where ice begins to accumulate. Once the ice has filled the entire cooled form, defrosting occurs under the influence of hot refrigerant vapor. The resulting ice cubes fall into the storage bin. The ice maker's bin is always guaranteed to contain the correct amount of cubed ice for the specific model. Just a few scoops from the bin are removed, and the system switches to "freezing" mode. Ice maker designers developed a special technology (the Brema "sprayer" system) that controls the nozzles using a thermostat and timer. This system also makes it possible to easily replace injectors if necessary, which helps avoid the usual problems associated with the formation of limescale deposits on them during operation. It should be noted that, although the nozzle monitoring system in Brema ice generators is more expensive than similar systems in devices from other manufacturers, it ensures good reproducibility of ice cubes (in terms of shape, density and geometric parameters) and also ensures a long service life of this equipment. It's worth noting that most Brema air-cooled units require virtually no condenser cleaning, as they are equipped with special filters that prevent contamination. The housings and internal components of all units, with the exception of the CB184W and CB184A, are made of stainless steel. These units—the smallest in terms of ...
Read in full
|
|
Photos. Brema CB425AHC Cube Ice Maker
Video. Brema CB425AHC Cube Ice Maker
| Subscribe to the video channel food-service.com.ua |
|
Accessories for Brema CB425AHC Cube Ice Maker
: 76116
Buy
in stock
Nozzle nozzle D20002 for ice makers Brema C150, C300 The nozzle, designed for spraying water in the sprayer, is suitable for the following manufacturers: Brema, Cookmax, Electrolux, IGF, Mastro, MBM, Pizza-Group Models BREMA C150, C300 , C300Split, C80, CB1265 , CB134, CB1565, CB184 , CB246 , CB249 ..
|
Spare parts for Brema CB425AHC Cube Ice Maker
: 39114
Buy
in stock
Solenoid valve electromagnetic water for ice generators: BREMA ice maker C80, CB416, CB425, CB640, CB674, CB840, CB955, DSS42, G1000, G1000Split, G1400SplitCO2, IC18, IC24, IC30, IF26, IF29, IMF26, IMF28, VB250 EMMEPI ice maker C80, CB425, CB640, CB840 FAGOR ice maker FCB-45, FCB-60, FCB-90, FCM-9..
: 19753
Buy
in stock
The ice maker curtain is used in Brema CB316, 416, 425 models. Size, mm: 440x80;..
: 26849
Order
made to order
Ice Maker Door for the Brema CB425 Technical specifications: application = for ice making machine width = 447 mm height = 217 mm thickness = 22 mm..
: 76116
Buy
in stock
Nozzle nozzle D20002 for ice makers Brema C150, C300 The nozzle, designed for spraying water in the sprayer, is suitable for the following manufacturers: Brema, Cookmax, Electrolux, IGF, Mastro, MBM, Pizza-Group Models BREMA C150, C300 , C300Split, C80, CB1265 , CB134, CB1565, CB184 , CB246 , CB249 ..
|
-
Technical specifications. Brema CB425AHC Cube Ice Maker
| Connection type |
to the water supply
|
| Cooling system |
air
|
| Hopper capacity, kg |
25
|
| Power, W |
450
|
| Productivity, kg/day |
48
|
| Type of ice |
cubic
|
| Overall dimensions (L x W x H), mm |
500x580x800
|
| Weight, кг |
56.00
|
| Water consumption, l/kg |
4
|
| Ambient temperature (min/max), °C |
+10/+43
|
| Ambient temperature, °C |
+21
|
| Coolant |
R290
|
| Water inlet pressure (min/max), bar |
1/6
|
| Water temperature, °C |
+15
|
| Execution |
stainless steel
|
| Ice mass, g |
18
|
| Water temperature (min/max), °C |
+3/+32
|
|
|
-
Description. Brema CB425AHC Cube Ice Maker
Brema cube ice maker.  SV series models are ideal for built-in installation under a bar counter thanks to their full front accessibility. However, when purchasing an ice maker, remember that the countertop height is typically 850-900 mm, meaning the unit installed under the bar counter should not exceed this height. Otherwise, you'll need to either order a higher countertop or choose a model with lower capacity.
Brema ice makers operate on a simple principle. Clean drinking water enters a storage tank and, using a built-in pump, is sprayed through a series of nozzles onto the evaporator, where ice begins to accumulate. Once the ice has filled the entire cooled form, defrosting occurs under the influence of hot refrigerant vapor. The resulting ice cubes fall into the storage bin. The ice maker's bin is always guaranteed to contain the correct amount of cubed ice for the specific model. Just a few scoops from the bin are removed, and the system switches to "freezing" mode. Ice maker designers developed a special technology (the Brema "sprayer" system) that controls the nozzles using a thermostat and timer.
This system also makes it possible to easily replace injectors if necessary, which helps avoid the usual problems associated with the formation of limescale deposits on them during operation.
It should be noted that, although the nozzle monitoring system in Brema ice generators is more expensive than similar systems in devices from other manufacturers, it ensures good reproducibility of ice cubes (in terms of shape, density and geometric parameters) and also ensures a long service life of this equipment.
It's worth noting that most Brema air-cooled units require virtually no condenser cleaning, as they are equipped with special filters that prevent contamination.
The housings and internal components of all units, with the exception of the CB184W and CB184A, are made of stainless steel. These units—the smallest in terms of size and performance in the Brema line—are constructed entirely of plastic, including the storage bin.
Successful operation of ice generators doesn't require any special technical skills. The main thing is proper and professional installation. Installation involves a single-phase AC power connection, a connection to the water supply (with water pressure from 0.1 to 0.6 MPa), and a sewer line. It is recommended to operate the units within an ambient temperature range of +10 to +35°C and a supply water temperature of +3 to +25°C.
When using air-cooled machines, it is necessary to provide for an "air jacket" (approximately 70 mm in volume of the machine) for their installation to allow free air flow to the ice generator fan.
Included. Brema CB425AHC Cube Ice Maker
- apparatus
- water supply and drain hose
- package
- passport instructions
- certificate
- warranty - 12 months.
About the manufacturer:. Brema CB425AHC Cube Ice Maker
Brema Ice Makers SpA, founded in 1984, has held a leading position in the global ice machine market since the mid-1990s. Manufacturing and assembly quality is monitored by computerized stations, and all products are inspected by a dedicated research laboratory. This equipment is classified as "tropical grade" and is extremely reliable.
Brema ice makers solve all your ice problems. They produce flake ice (models 902, 1540, and 1555 A/W in the GB series and models 350 and 800 in the MUSTER series), granite ice (models 250, 500, and 1000 in the G series), and the most popular cube ice (the CB series). The choice of model depends on the installation location, the type of ice required, and the quantity.
Our company has been offering the full range of Brema ice makers on the domestic market for several years. Our most popular cube ice makers are available in a wide range of capacities and sizes, including the following models: CB184, 246, 249, 316, 416, 425, 640, 840, 955, 1265, and 1565 A/W.
Buy Brema CB425AHC Cube Ice Maker by price 85058 грн
text_desc_seo_2
text_desc_seo_3
text_desc_seo_4
Our many years of experience and professionalism have earned us an excellent reputation in the Ukrainian food equipment market. Our competitive prices and product quality will delight you! Happy shopping.
-
Фотографии. Brema CB425AHC Cube Ice Maker
Видео. Brema CB425AHC Cube Ice Maker
| Подписаться на видео канал food-service.com.ua |
|
-
Accessories for Brema CB425AHC Cube Ice Maker
: 76116
Buy
in stock
Nozzle nozzle D20002 for ice makers Brema C150, C300 The nozzle, designed for spraying water in the sprayer, is suitable for the following manufacturers: Brema, Cookmax, Electrolux, IGF, Mastro, MBM, Pizza-Group Models BREMA C150, C300 , C300Split, C80, CB1265 , CB134, CB1565, CB184 , CB246 , CB249 ..
|
Spare parts for Brema CB425AHC Cube Ice Maker
: 39114
Buy
in stock
Solenoid valve electromagnetic water for ice generators: BREMA ice maker C80, CB416, CB425, CB640, CB674, CB840, CB955, DSS42, G1000, G1000Split, G1400SplitCO2, IC18, IC24, IC30, IF26, IF29, IMF26, IMF28, VB250 EMMEPI ice maker C80, CB425, CB640, CB840 FAGOR ice maker FCB-45, FCB-60, FCB-90, FCM-9..
: 19753
Buy
in stock
The ice maker curtain is used in Brema CB316, 416, 425 models. Size, mm: 440x80;..
: 26849
Order
made to order
Ice Maker Door for the Brema CB425 Technical specifications: application = for ice making machine width = 447 mm height = 217 mm thickness = 22 mm..
: 76116
Buy
in stock
Nozzle nozzle D20002 for ice makers Brema C150, C300 The nozzle, designed for spraying water in the sprayer, is suitable for the following manufacturers: Brema, Cookmax, Electrolux, IGF, Mastro, MBM, Pizza-Group Models BREMA C150, C300 , C300Split, C80, CB1265 , CB134, CB1565, CB184 , CB246 , CB249 ..
|
|
