-
About everything
- Characteristics
- Description
- Photo / Video(5/5)
- Accessories / Spare parts
-
Technical specifications
| Connection type |
to the water supply |
| Cooling system |
air |
| Hopper capacity, kg |
40 |
| Power, W |
650 |
| Productivity, kg/day |
67 |
| Type of ice |
cubic |
| Overall dimensions (L x W x H), mm |
738x600x851 |
| Weight, кг |
72.00 |
| Coolant |
R404a |
| Water consumption, l/kg |
2.8 |
| Ice mass, g |
13, 18, 33, 42 |
| Water temperature, °C |
+15 |
| Ambient temperature, °C |
+21 |
| Ambient temperature (min/max), °C |
+10/+43 |
| Water inlet pressure (min/max), bar |
1/6 |
| Water temperature, °C |
+15 |
| Execution |
stainless steel |
All characteristics
Description. Brema CB674A Cube Ice Maker
Ice cube maker Brema CB 674A. Air cooling. The Brema CB 67A ice maker from Italy is designed for ice production in bar, restaurant, hotel, or nightclub kitchens and can produce over 67 kg of cubed ice per day. The machine is made of stainless steel and uses an environmentally friendly refrigeration unit (R 404a refrigerant). The Brema SV 1265A ice maker features an automatic ice level maintenance system: when the bin is full, the system stops producing ice and replenishes it as needed. The ice is stored in the bin, which has a capacity of 65 kg for this model. The sprayer system monitors the condition of the nozzles (through which water is sprayed onto the evaporator by a pump) and allows for timely replacement of the nozzles if limescale builds up on them during operation. The unit is air-cooled. Installation requires a cold water inlet (1/2 or 3/4" valve) and a water outlet (24 mm outlet). SV series models are ideal for built-in installation under a bar counter thanks to their full front accessibility. However, when purchasing an ice maker, remember that the countertop height is typically 850-900 mm, meaning the unit installed under the bar counter should not exceed this height. Otherwise, you'll need to either order a higher countertop or choose a model with lower capacity. Brema ice makers operate on a simple principle. Clean drinking water enters a storage tank and, using a built-in pump, is sprayed through a series of nozzles onto the evaporator, where ice begins to accumulate. Once the ice has filled the entire cooled form, defrosting occurs under the influence of hot refrigerant vapor. The resulting ice cubes fall into the storage bin. The ice maker's bin is always guaranteed to contain the correct amount of cubed ice for the specific model. Just a few scoops from the bin are removed, and the system switches to "freezing" mode. Ice maker designers developed a special tec...
Read in full
|
|
Photos. Brema CB674A Cube Ice Maker
Video. Brema CB674A Cube Ice Maker
| Subscribe to the video channel food-service.com.ua |
|
Accessories for Brema CB674A Cube Ice Maker
: 99670
Buy
in stock
Water softeners Frosty DVA 8 regenerable. The water softening process extends the life of connected equipment, thereby eliminating unnecessary costs and hassle. The water softener filter operates on the principle of ion exchange of hardness salts (calcium) for sodium ions. Along with the water, hard..
: 55711
Buy
in stock
Water softeners Frosty DVA 12 regenerable. The water softening process extends the life of connected equipment, thereby eliminating unnecessary costs and hassle. The water softener filter operates on the principle of ion exchange of hardness salts (calcium) for sodium ions. Along with the water, har..
: 73124
Buy
in stock
Frosty DVA 16 regenerable water softeners The water softening process extends the life of connected equipment, thereby eliminating unnecessary costs and hassle. The water softener filter operates on the principle of ion exchange of hardness salts (calcium) for sodium ions. Along with the water, hard..
: 78795
Buy
in stock
GoodFood CMA LT 8 Water Softener Filter The water softening process extends the life of connected equipment, thereby eliminating unnecessary costs and hassle. The water softener filter operates on the principle of ion exchange of hardness salts (calcium) for sodium ions. Along with the water, hardne..
: 76116
Buy
in stock
Nozzle nozzle D20002 for ice makers Brema C150, C300 The nozzle, designed for spraying water in the sprayer, is suitable for the following manufacturers: Brema, Cookmax, Electrolux, IGF, Mastro, MBM, Pizza-Group Models BREMA C150, C300 , C300Split, C80, CB1265 , CB134, CB1565, CB184 , CB246 , CB249 ..
|
Spare parts for Brema CB674A Cube Ice Maker
: 38865
Buy
in stock
Timer programmer art. 23247 for 10 minutes. Timer 23247/085285 is suitable for many models of ice generators: Alpeninox, Brema , Cookmax, Electrolux, Emmepi, Fagor, Mastro, MBM, NTF , etc. The timer is compatible with the following models: BREMA ice makers: C150, C300, C300Split, C80, CB1265, CB1565..
: 39114
Buy
in stock
Solenoid valve electromagnetic water for ice generators: BREMA ice maker C80, CB416, CB425, CB640, CB674, CB840, CB955, DSS42, G1000, G1000Split, G1400SplitCO2, IC18, IC24, IC30, IF26, IF29, IMF26, IMF28, VB250 EMMEPI ice maker C80, CB425, CB640, CB840 FAGOR ice maker FCB-45, FCB-60, FCB-90, FCM-9..
: 61731
Order
made to order
Ice maker door Suitable for manufacturers Brema, Cookmax, IGF Models: CB1265 , CB1565 , CB640 , CB674 , CB840 , CB955 , GB1540 , GB1555 , IF75, IMF80, TB1404, TB1405, VB250, FCB-120, FCB-130, FCB-155, FCB-60, FCB-90, FHE-140, FHE-150, FHE-150A-W, IcemakerCB640, CB955, IcemakerIMF80A (730014), IMF80..
: 37623
Buy
in stock
Thermal protection C23114 with a 24 mm hole spacing for Brema ice makers . Also installed in Alpeninox, Electrolux, Fagor, and Zanussi equipment. Compatible with models: BREMA: ice maker C150, C80, CB1265, CB1565, CB184, CB246, CB249, CB316, CB416, CB425, CB640, CB674, CB840, CB955, DSS42, FM, FM..
: 76116
Buy
in stock
Nozzle nozzle D20002 for ice makers Brema C150, C300 The nozzle, designed for spraying water in the sprayer, is suitable for the following manufacturers: Brema, Cookmax, Electrolux, IGF, Mastro, MBM, Pizza-Group Models BREMA C150, C300 , C300Split, C80, CB1265 , CB134, CB1565, CB184 , CB246 , CB249 ..
: 67622
Buy
in stock
Sensor diameter: 2 mm Sensor length: - mm Capillary tube length: 2000 mm Type: K22L1082 Evaporator thermostat -22 °C..-3°C RANCO K22L1082 for ice makers: BREMA: C150, C150-CubeA, C300, C300-CubeA, C300Split, C80, C80-CubeA, CB1265, CB1265-CubeA, CB134, CB1565, CB1565-CubeA, CB184, CB246, CB246-CubeA..
|
-
Technical specifications. Brema CB674A Cube Ice Maker
| Connection type |
to the water supply
|
| Cooling system |
air
|
| Hopper capacity, kg |
40
|
| Power, W |
650
|
| Productivity, kg/day |
67
|
| Type of ice |
cubic
|
| Overall dimensions (L x W x H), mm |
738x600x851
|
| Weight, кг |
72.00
|
| Coolant |
R404a
|
| Water consumption, l/kg |
2.8
|
| Ice mass, g |
13, 18, 33, 42
|
| Water temperature, °C |
+15
|
| Ambient temperature, °C |
+21
|
| Ambient temperature (min/max), °C |
+10/+43
|
| Water inlet pressure (min/max), bar |
1/6
|
| Water temperature, °C |
+15
|
| Execution |
stainless steel
|
|
|
-
Description. Brema CB674A Cube Ice Maker
Ice cube maker Brema CB 674A.  Air cooling.
The Brema CB 67A ice maker from Italy is designed for ice production in bar, restaurant, hotel, or nightclub kitchens and can produce over 67 kg of cubed ice per day. The machine is made of stainless steel and uses an environmentally friendly refrigeration unit (R 404a refrigerant).
The Brema SV 1265A ice maker features an automatic ice level maintenance system: when the bin is full, the system stops producing ice and replenishes it as needed. The ice is stored in the bin, which has a capacity of 65 kg for this model.
The sprayer system monitors the condition of the nozzles (through which water is sprayed onto the evaporator by a pump) and allows for timely replacement of the nozzles if limescale builds up on them during operation. The unit is air-cooled. Installation requires a cold water inlet (1/2 or 3/4" valve) and a water outlet (24 mm outlet).
SV series models are ideal for built-in installation under a bar counter thanks to their full front accessibility. However, when purchasing an ice maker, remember that the countertop height is typically 850-900 mm, meaning the unit installed under the bar counter should not exceed this height. Otherwise, you'll need to either order a higher countertop or choose a model with lower capacity.
Brema ice makers operate on a simple principle. Clean drinking water enters a storage tank and, using a built-in pump, is sprayed through a series of nozzles onto the evaporator, where ice begins to accumulate. Once the ice has filled the entire cooled form, defrosting occurs under the influence of hot refrigerant vapor. The resulting ice cubes fall into the storage bin. The ice maker's bin is always guaranteed to contain the correct amount of cubed ice for the specific model. Just a few scoops from the bin are removed, and the system switches to "freezing" mode. Ice maker designers developed a special technology (the Brema "sprayer" system) that controls the nozzles using a thermostat and timer.
This system also makes it possible to easily replace injectors if necessary, which helps avoid the usual problems associated with the formation of limescale deposits on them during operation.
It should be noted that, although the nozzle monitoring system in Brema ice generators is more expensive than similar systems in devices from other manufacturers, it ensures good reproducibility of ice cubes (in terms of shape, density and geometric parameters) and also ensures a long service life of this equipment.
It's worth noting that most Brema air-cooled units require virtually no condenser cleaning, as they are equipped with special filters that prevent contamination.
The housings and internal components of all units, with the exception of the CB184W and CB184A, are made of stainless steel. These units—the smallest in terms of size and performance in the Brema line—are constructed entirely of plastic, including the storage bin.
Successful operation of ice generators doesn't require any special technical skills. The main thing is proper and professional installation. Installation involves a single-phase AC power connection, a connection to the water supply (with water pressure from 0.1 to 0.6 MPa), and a sewer line. It is recommended to operate the units within an ambient temperature range of +10 to +35°C and a supply water temperature of +3 to +25°C.
When using air-cooled machines, it is necessary to provide for an "air jacket" (approximately 70 mm in volume of the machine) for their installation to allow free air flow to the ice generator fan.
Included. Brema CB674A Cube Ice Maker
- apparatus
- water supply and drain hose
- package
- passport instructions
- certificate
- warranty - 12 months.
About the manufacturer:. Brema CB674A Cube Ice Maker
Brema Ice Makers SpA , founded in 1984, has held a leading position in the global ice machine market since the mid-1990s. Manufacturing and assembly quality is monitored by computerized stations, and all products are inspected by a dedicated research laboratory. This equipment is classified as "tropical grade" and is extremely reliable.
Brema ice makers solve all your ice problems. They produce flake ice (models 902, 1540, and 1555 A/W in the GB series and models 350 and 800 in the MUSTER series), granite ice (models 250, 500, and 1000 in the G series), and the most popular cube ice (the CB series). The choice of model depends on the installation location, the type of ice required, and the quantity.
Our company has been offering the full range of Brema ice makers on the domestic market for several years. Our most popular cube ice makers are available in a wide range of capacities and sizes, including the following models: CB184, 246, 249, 316, 416, 425, 640, 840, 955, 1265, and 1565 A/W.
Buy Brema CB674A Cube Ice Maker by price 77460 грн
text_desc_seo_2
text_desc_seo_3
text_desc_seo_4
Our many years of experience and professionalism have earned us an excellent reputation in the Ukrainian food equipment market. Our competitive prices and product quality will delight you! Happy shopping.
-
Фотографии. Brema CB674A Cube Ice Maker
Видео. Brema CB674A Cube Ice Maker
| Подписаться на видео канал food-service.com.ua |
|
-
Accessories for Brema CB674A Cube Ice Maker
: 99670
Buy
in stock
Water softeners Frosty DVA 8 regenerable. The water softening process extends the life of connected equipment, thereby eliminating unnecessary costs and hassle. The water softener filter operates on the principle of ion exchange of hardness salts (calcium) for sodium ions. Along with the water, hard..
: 55711
Buy
in stock
Water softeners Frosty DVA 12 regenerable. The water softening process extends the life of connected equipment, thereby eliminating unnecessary costs and hassle. The water softener filter operates on the principle of ion exchange of hardness salts (calcium) for sodium ions. Along with the water, har..
: 73124
Buy
in stock
Frosty DVA 16 regenerable water softeners The water softening process extends the life of connected equipment, thereby eliminating unnecessary costs and hassle. The water softener filter operates on the principle of ion exchange of hardness salts (calcium) for sodium ions. Along with the water, hard..
: 78795
Buy
in stock
GoodFood CMA LT 8 Water Softener Filter The water softening process extends the life of connected equipment, thereby eliminating unnecessary costs and hassle. The water softener filter operates on the principle of ion exchange of hardness salts (calcium) for sodium ions. Along with the water, hardne..
: 76116
Buy
in stock
Nozzle nozzle D20002 for ice makers Brema C150, C300 The nozzle, designed for spraying water in the sprayer, is suitable for the following manufacturers: Brema, Cookmax, Electrolux, IGF, Mastro, MBM, Pizza-Group Models BREMA C150, C300 , C300Split, C80, CB1265 , CB134, CB1565, CB184 , CB246 , CB249 ..
|
Spare parts for Brema CB674A Cube Ice Maker
: 38865
Buy
in stock
Timer programmer art. 23247 for 10 minutes. Timer 23247/085285 is suitable for many models of ice generators: Alpeninox, Brema , Cookmax, Electrolux, Emmepi, Fagor, Mastro, MBM, NTF , etc. The timer is compatible with the following models: BREMA ice makers: C150, C300, C300Split, C80, CB1265, CB1565..
: 39114
Buy
in stock
Solenoid valve electromagnetic water for ice generators: BREMA ice maker C80, CB416, CB425, CB640, CB674, CB840, CB955, DSS42, G1000, G1000Split, G1400SplitCO2, IC18, IC24, IC30, IF26, IF29, IMF26, IMF28, VB250 EMMEPI ice maker C80, CB425, CB640, CB840 FAGOR ice maker FCB-45, FCB-60, FCB-90, FCM-9..
: 61731
Order
made to order
Ice maker door Suitable for manufacturers Brema, Cookmax, IGF Models: CB1265 , CB1565 , CB640 , CB674 , CB840 , CB955 , GB1540 , GB1555 , IF75, IMF80, TB1404, TB1405, VB250, FCB-120, FCB-130, FCB-155, FCB-60, FCB-90, FHE-140, FHE-150, FHE-150A-W, IcemakerCB640, CB955, IcemakerIMF80A (730014), IMF80..
: 37623
Buy
in stock
Thermal protection C23114 with a 24 mm hole spacing for Brema ice makers . Also installed in Alpeninox, Electrolux, Fagor, and Zanussi equipment. Compatible with models: BREMA: ice maker C150, C80, CB1265, CB1565, CB184, CB246, CB249, CB316, CB416, CB425, CB640, CB674, CB840, CB955, DSS42, FM, FM..
: 76116
Buy
in stock
Nozzle nozzle D20002 for ice makers Brema C150, C300 The nozzle, designed for spraying water in the sprayer, is suitable for the following manufacturers: Brema, Cookmax, Electrolux, IGF, Mastro, MBM, Pizza-Group Models BREMA C150, C300 , C300Split, C80, CB1265 , CB134, CB1565, CB184 , CB246 , CB249 ..
: 67622
Buy
in stock
Sensor diameter: 2 mm Sensor length: - mm Capillary tube length: 2000 mm Type: K22L1082 Evaporator thermostat -22 °C..-3°C RANCO K22L1082 for ice makers: BREMA: C150, C150-CubeA, C300, C300-CubeA, C300Split, C80, C80-CubeA, CB1265, CB1265-CubeA, CB134, CB1565, CB1565-CubeA, CB184, CB246, CB246-CubeA..
|
|
