-
About everything
- Characteristics
- Description
- Photo / Video(3/2)
- Accessories / Spare parts
-
Technical specifications
| Connection type |
to the water supply |
| Cooling system |
air |
| Hopper capacity, kg |
16 |
| Power, W |
340 |
| Productivity, kg/day |
42 |
| Type of ice |
cubic |
| Overall dimensions (L x W x H), mm |
500x580x800 |
| Weight, кг |
52.00 |
| Height without legs, mm |
690 |
| Water temperature (min/max), °C |
+3/+32 |
| Ambient temperature (min/max), °C |
+10/+43 |
| Ice mass, g |
18 |
| Ambient temperature, °C |
+21 |
| Coolant |
R290 |
| Water temperature, °C |
+15 |
| Water inlet pressure (min/max), bar |
1/6 |
| Water consumption, l/kg |
4 |
| Execution |
stainless steel |
All characteristics
Description. Brema CB416AHC Cube Ice Maker
Brema СВ416АHC Cube Ice Maker.
The SV series models are ideal for installation under a bar counter thanks to their full front accessibility. However, when purchasing an ice maker, remember that the worktop height is typically 850-900 mm, meaning that a unit installed under a bar counter should not exceed this height. Otherwise, you should either order a higher countertop or choose a model with a lower capacity.
The operating principle of Brema ice makers is quite simple. Clean drinking water enters the storage tank and, using a built-in pump, is sprayed through a series of nozzles onto the evaporator, where ice accumulates. When the ice fills the entire volume of the cooled form, defrosting occurs under the action of hot refrigerant vapor. The prepared ice cubes fall into the storage bin. The bin of the ice maker is always guaranteed to contain the correct amount of cubed ice for the given model. It is worth taking just a few scoops from the hopper, and the system switches to the "freezing" mode. Ice maker designers have developed a special technology (the Brema "sprayers" system) to monitor the nozzles' operation using a thermostat and timer.
This system also allows for easy nozzle replacement when necessary, eliminating common problems associated with limescale deposits on them during operation.
It should be noted that, although the nozzle monitoring system in Brema ice makers is more expensive than similar systems in other manufacturers' units, it ensures good ice cube reproducibility (in terms of shape, density, and geometric parameters) and also ensures a long service life for this equipment.
It should be noted that most air-cooled Brema units require virtually no condenser cleaning, as they are equipped with special filters that prevent contamination.
The housings and internal components of all units, with the exception of models The CB184W and CB184A are made of stainless steel. These units—the smallest in size and performance in the Brema line—are...
Read in full
|
|
Photos. Brema CB416AHC Cube Ice Maker
Video. Brema CB416AHC Cube Ice Maker
| Subscribe to the video channel food-service.com.ua |
|
-
Technical specifications. Brema CB416AHC Cube Ice Maker
| Connection type |
to the water supply
|
| Cooling system |
air
|
| Hopper capacity, kg |
16
|
| Power, W |
340
|
| Productivity, kg/day |
42
|
| Type of ice |
cubic
|
| Overall dimensions (L x W x H), mm |
500x580x800
|
| Weight, кг |
52.00
|
| Height without legs, mm |
690
|
| Water temperature (min/max), °C |
+3/+32
|
| Ambient temperature (min/max), °C |
+10/+43
|
| Ice mass, g |
18
|
| Ambient temperature, °C |
+21
|
| Coolant |
R290
|
| Water temperature, °C |
+15
|
| Water inlet pressure (min/max), bar |
1/6
|
| Water consumption, l/kg |
4
|
| Execution |
stainless steel
|
|
|
-
Description. Brema CB416AHC Cube Ice Maker
Brema СВ416АHC Cube Ice Maker.
The SV series models are ideal for installation under a bar counter thanks to their full front accessibility. However, when purchasing an ice maker, remember that the worktop height is typically 850-900 mm, meaning that a unit installed under a bar counter should not exceed this height. Otherwise, you should either order a higher countertop or choose a model with a lower capacity.
The operating principle of Brema ice makers is quite simple. Clean drinking water enters the storage tank and, using a built-in pump, is sprayed through a series of nozzles onto the evaporator, where ice accumulates. When the ice fills the entire volume of the cooled form, defrosting occurs under the action of hot refrigerant vapor. The prepared ice cubes fall into the storage bin. The bin of the ice maker is always guaranteed to contain the correct amount of cubed ice for the given model. It is worth taking just a few scoops from the hopper, and the system switches to the "freezing" mode. Ice maker designers have developed a special technology (the Brema "sprayers" system) to monitor the nozzles' operation using a thermostat and timer.
This system also allows for easy nozzle replacement when necessary, eliminating common problems associated with limescale deposits on them during operation.
It should be noted that, although the nozzle monitoring system in Brema ice makers is more expensive than similar systems in other manufacturers' units, it ensures good ice cube reproducibility (in terms of shape, density, and geometric parameters) and also ensures a long service life for this equipment.
It should be noted that most air-cooled Brema units require virtually no condenser cleaning, as they are equipped with special filters that prevent contamination.
The housings and internal components of all units, with the exception of models The CB184W and CB184A are made of stainless steel. These units—the smallest in size and performance in the Brema line—are constructed entirely of plastic, including the storage bin.
Successful operation of these ice makers does not require any special technical skills. The main requirement is proper and professional installation. Installation involves a single-phase AC power connection, a connection to the water supply (with water pressure from 0.1 to 0.6 MPa), and a sewer line. It is recommended to operate the units in an ambient temperature range of +10 to +35°C and a supply water temperature of +3 to +25°C.
For air-cooled units, an air jacket (approximately 70 mm in the unit's volume) must be provided for their installation to ensure free airflow to the ice maker's fan.
Included. Brema CB416AHC Cube Ice Maker
- apparatus
- water supply and drain hose
- package
- passport instructions
- certificate
- warranty - 12 months.
About the manufacturer:. Brema CB416AHC Cube Ice Maker
Brema Ice Makers SpA, founded in 1984, has held a leading position in the global ice machine market since the mid-1990s. Manufacturing and assembly quality is monitored by computerized stations, and all products are inspected by a dedicated research laboratory. This equipment is classified as "tropical grade" and is extremely reliable.
Brema ice makers solve all your ice problems. They produce flake ice (models 902, 1540, and 1555 A/W in the GB series and models 350 and 800 in the MUSTER series), granite ice (models 250, 500, and 1000 in the G series), and the most popular cube ice (the CB series). The choice of model depends on the installation location, the type of ice required, and the quantity.
Our company has been offering the full range of Brema ice makers on the domestic market for several years. Our most popular cube ice makers are available in a wide range of capacities and sizes, including the following models: CB184, 246, 249, 316, 416, 425, 640, 840, 955, 1265, and 1565 A/W.
Buy Brema CB416AHC Cube Ice Maker by price 79103 грн
text_desc_seo_2
text_desc_seo_3
text_desc_seo_4
Our many years of experience and professionalism have earned us an excellent reputation in the Ukrainian food equipment market. Our competitive prices and product quality will delight you! Happy shopping.
-
Фотографии. Brema CB416AHC Cube Ice Maker
Видео. Brema CB416AHC Cube Ice Maker
| Подписаться на видео канал food-service.com.ua |
|
-
|
