-
About everything
- Characteristics
- Description
- Photo / Video(5/0)
- Accessories / Spare parts
-
Technical specifications
| Connection type |
to the water supply |
| Cooling system |
water |
| Hopper capacity, kg |
4 |
| Power, W |
320 |
| Productivity, kg/day |
20 |
| Type of ice |
cubic |
| Overall dimensions (L x W x H), mm |
355x404x590 |
| Weight, кг |
27.50 |
| Water consumption, l/kg |
20 |
| Ice mass, g |
14 |
| Coolant |
R452A |
| Ambient temperature, °C |
+21 |
| Water temperature, °C |
+15 |
| Water inlet pressure (min/max), bar |
1/6 |
| Ambient temperature (min/max), °C |
+10/+43 |
| Execution |
stainless steel |
| Water temperature (min/max), °C |
+3/+32 |
All characteristics
Description. Ice cube maker NTF-SL35W
Ice cube maker NTF-SL35W. The NTF SL series models are ideal for built-in bar counters thanks to the possibility of full front service and water cooling. The system is water-cooled and requires no side or rear air supply. The ability to integrate an ice maker is crucial in bars where every centimeter counts. In this case, a water-cooled ice maker is ideal. Ice makers operate on a fairly simple principle. Clean drinking water enters a storage tank and, using a built-in pump, is sprayed through a series of nozzles onto the evaporator, where ice begins to accumulate. Once the ice has filled the entire cooled form, defrosting occurs under the influence of hot refrigerant vapor. The resulting ice cubes fall into the storage bin. The ice maker's bin is always guaranteed to contain the correct amount of cubed ice for the specific model. Just a few scoops from the bin are removed, and the system switches to "freezing" mode. Ice maker designers developed a special technology (a "sprayer" system) that controls the nozzles using a thermostat and timer. This system also makes it possible to easily replace injectors if necessary, which helps avoid the usual problems associated with the formation of limescale deposits on them during operation. Successful operation of ice generators doesn't require any special technical skills. The main thing is proper and professional installation. Installation involves a single-phase AC power connection, a connection to the water supply (with water pressure from 0.1 to 0.6 MPa), and a sewer line. It is recommended to operate the units within an ambient temperature range of +10 to +43°C and a supply water temperature of +3 to +32°C. ...
Read in full
|
|
Photos. Ice cube maker NTF-SL35W
Accessories for Ice cube maker NTF-SL35W
: 99670
Buy
in stock
Water softeners Frosty DVA 8 regenerable. The water softening process extends the life of connected equipment, thereby eliminating unnecessary costs and hassle. The water softener filter operates on the principle of ion exchange of hardness salts (calcium) for sodium ions. Along with the water, hard..
: 55711
Buy
in stock
Water softeners Frosty DVA 12 regenerable. The water softening process extends the life of connected equipment, thereby eliminating unnecessary costs and hassle. The water softener filter operates on the principle of ion exchange of hardness salts (calcium) for sodium ions. Along with the water, har..
: 73124
Buy
in stock
Frosty DVA 16 regenerable water softeners The water softening process extends the life of connected equipment, thereby eliminating unnecessary costs and hassle. The water softener filter operates on the principle of ion exchange of hardness salts (calcium) for sodium ions. Along with the water, hard..
: 78795
Buy
in stock
GoodFood CMA LT 8 Water Softener Filter The water softening process extends the life of connected equipment, thereby eliminating unnecessary costs and hassle. The water softener filter operates on the principle of ion exchange of hardness salts (calcium) for sodium ions. Along with the water, hardne..
|
Spare parts for Ice cube maker NTF-SL35W
: 61651
Buy
in stock
Pump motor Rebo N200110 Code: 23073 / Type NR40 cl.B / P1 - W55 - A0.4 - V220/240 - HZ50 / Thermally protected Compatible with the following ice maker models: BREMA ice makers : CB184 , FM, IC18, IC24, IC30, M1000SplitCO2, M250, M350, M350SPLIT, M600, M600SPLIT, M600SplitCO2, M800, M800SPLIT, VB25..
: 67622
Buy
in stock
Sensor diameter: 2 mm Sensor length: - mm Capillary tube length: 2000 mm Type: K22L1082 Evaporator thermostat -22 °C..-3°C RANCO K22L1082 for ice makers: BREMA: C150, C150-CubeA, C300, C300-CubeA, C300Split, C80, C80-CubeA, CB1265, CB1265-CubeA, CB134, CB1565, CB1565-CubeA, CB184, CB246, CB246-CubeA..
|
-
Technical specifications. Ice cube maker NTF-SL35W
| Connection type |
to the water supply
|
| Cooling system |
water
|
| Hopper capacity, kg |
4
|
| Power, W |
320
|
| Productivity, kg/day |
20
|
| Type of ice |
cubic
|
| Overall dimensions (L x W x H), mm |
355x404x590
|
| Weight, кг |
27.50
|
| Water consumption, l/kg |
20
|
| Ice mass, g |
14
|
| Coolant |
R452A
|
| Ambient temperature, °C |
+21
|
| Water temperature, °C |
+15
|
| Water inlet pressure (min/max), bar |
1/6
|
| Ambient temperature (min/max), °C |
+10/+43
|
| Execution |
stainless steel
|
| Water temperature (min/max), °C |
+3/+32
|
|
|
-
Description. Ice cube maker NTF-SL35W
Ice cube maker NTF-SL35W. 
The NTF SL series models are ideal for built-in bar counters thanks to the possibility of full front service and water cooling.
The system is water-cooled and requires no side or rear air supply. The ability to integrate an ice maker is crucial in bars where every centimeter counts. In this case, a water-cooled ice maker is ideal.
Ice makers operate on a fairly simple principle. Clean drinking water enters a storage tank and, using a built-in pump, is sprayed through a series of nozzles onto the evaporator, where ice begins to accumulate. Once the ice has filled the entire cooled form, defrosting occurs under the influence of hot refrigerant vapor. The resulting ice cubes fall into the storage bin. The ice maker's bin is always guaranteed to contain the correct amount of cubed ice for the specific model. Just a few scoops from the bin are removed, and the system switches to "freezing" mode. Ice maker designers developed a special technology (a "sprayer" system) that controls the nozzles using a thermostat and timer.
This system also makes it possible to easily replace injectors if necessary, which helps avoid the usual problems associated with the formation of limescale deposits on them during operation.
Successful operation of ice generators doesn't require any special technical skills. The main thing is proper and professional installation. Installation involves a single-phase AC power connection, a connection to the water supply (with water pressure from 0.1 to 0.6 MPa), and a sewer line. It is recommended to operate the units within an ambient temperature range of +10 to +43°C and a supply water temperature of +3 to +32°C.
Included. Ice cube maker NTF-SL35W
- apparatus
- water supply and drain hose
- package
- passport instructions
- certificate
- warranty - 12 months.
About the manufacturer:. Ice cube maker NTF-SL35W
Brema Ice Makers SpA, founded in 1984, has held a leading position in the global ice machine market since the mid-1990s. Manufacturing and assembly quality is monitored by computerized stations, and all products are inspected by a dedicated research laboratory. This equipment is classified as "tropical grade" and is extremely reliable.
Brema ice makers solve all your ice problems. They produce flake ice (models 902, 1540, and 1555 A/W in the GB series and models 350 and 800 in the MUSTER series), granite ice (models 250, 500, and 1000 in the G series), and the most popular cube ice (the CB series). The choice of model depends on the installation location, the type of ice required, and the quantity.
Our company has been offering the full range of Brema ice makers on the domestic market for several years. Our most popular cube ice makers are available in a wide range of capacities and sizes, including the following models: CB184, 246, 249, 316, 416, 425, 640, 840, 955, 1265, and 1565 A/W.
Buy Ice cube maker NTF-SL35W by price 40013 грн
text_desc_seo_2
text_desc_seo_3
text_desc_seo_4
Our many years of experience and professionalism have earned us an excellent reputation in the Ukrainian food equipment market. Our competitive prices and product quality will delight you! Happy shopping.
-
Фотографии. Ice cube maker NTF-SL35W
-
Accessories for Ice cube maker NTF-SL35W
: 99670
Buy
in stock
Water softeners Frosty DVA 8 regenerable. The water softening process extends the life of connected equipment, thereby eliminating unnecessary costs and hassle. The water softener filter operates on the principle of ion exchange of hardness salts (calcium) for sodium ions. Along with the water, hard..
: 55711
Buy
in stock
Water softeners Frosty DVA 12 regenerable. The water softening process extends the life of connected equipment, thereby eliminating unnecessary costs and hassle. The water softener filter operates on the principle of ion exchange of hardness salts (calcium) for sodium ions. Along with the water, har..
: 73124
Buy
in stock
Frosty DVA 16 regenerable water softeners The water softening process extends the life of connected equipment, thereby eliminating unnecessary costs and hassle. The water softener filter operates on the principle of ion exchange of hardness salts (calcium) for sodium ions. Along with the water, hard..
: 78795
Buy
in stock
GoodFood CMA LT 8 Water Softener Filter The water softening process extends the life of connected equipment, thereby eliminating unnecessary costs and hassle. The water softener filter operates on the principle of ion exchange of hardness salts (calcium) for sodium ions. Along with the water, hardne..
|
Spare parts for Ice cube maker NTF-SL35W
: 61651
Buy
in stock
Pump motor Rebo N200110 Code: 23073 / Type NR40 cl.B / P1 - W55 - A0.4 - V220/240 - HZ50 / Thermally protected Compatible with the following ice maker models: BREMA ice makers : CB184 , FM, IC18, IC24, IC30, M1000SplitCO2, M250, M350, M350SPLIT, M600, M600SPLIT, M600SplitCO2, M800, M800SPLIT, VB25..
: 67622
Buy
in stock
Sensor diameter: 2 mm Sensor length: - mm Capillary tube length: 2000 mm Type: K22L1082 Evaporator thermostat -22 °C..-3°C RANCO K22L1082 for ice makers: BREMA: C150, C150-CubeA, C300, C300-CubeA, C300Split, C80, C80-CubeA, CB1265, CB1265-CubeA, CB134, CB1565, CB1565-CubeA, CB184, CB246, CB246-CubeA..
|
|
23073_087810-150x150.jpg "REBO NR40 23073/087810 Pump Motor for Brema Ice Makers")
