-
About everything
- Characteristics
- Description
- Photo / Video(3/2)
- Accessories / Spare parts
-
Technical specifications
| Connection type |
to the water supply |
| Cooling system |
air |
| Power, W |
300 |
| Productivity, kg/day |
400 |
| Type of ice |
cubic |
| Overall dimensions (L x W x H), mm |
770x550x805 |
| Weight, кг |
113.00 |
| Water temperature (min/max), °C |
+3/+32 |
| Ambient temperature (min/max), °C |
+10/+43 |
| Ice mass, g |
7 |
| Ambient temperature, °C |
+21 |
| Coolant |
R404a |
| Water temperature, °C |
+15 |
| Water inlet pressure (min/max), bar |
1/6 |
| Water consumption, l/kg |
1.8 |
| Execution |
stainless steel |
All characteristics
Description. Ice maker Brema VM 900A
Brema pyramid ice maker. Without hopper/storage tank. Vertical evaporator. Brema ice makers operate on a simple principle. Clean drinking water enters a storage tank and, using a built-in pump, is sprayed through a series of nozzles onto the evaporator, where ice begins to accumulate. Once the ice has filled the entire cooled form, defrosting occurs under the influence of hot refrigerant vapor. The resulting ice cubes fall into the storage bin. The ice maker's bin is always guaranteed to contain the correct amount of cubed ice for the specific model. Just a few scoops from the bin are removed, and the system switches to "freezing" mode. Ice maker designers developed a special technology (the Brema "sprayer" system) that controls the nozzles using a thermostat and timer. This system also makes it possible to easily replace injectors if necessary, which helps avoid the usual problems associated with the formation of limescale deposits on them during operation. It should be noted that, although the nozzle monitoring system in Brema ice generators is more expensive than similar systems in devices from other manufacturers, it ensures good reproducibility of ice cubes (in terms of shape, density and geometric parameters) and also ensures a long service life of this equipment. It's worth noting that most Brema air-cooled units require virtually no condenser cleaning, as they are equipped with special filters that prevent contamination. Successful operation of ice generators doesn't require any special technical skills. The main thing is proper and professional installation. Installation involves a single-phase AC power connection, a connection to the water supply (with water pressure from 0.1 to 0.6 MPa), and a sewer line. It is recommended to operate the units within an ambient temperature range of +10 to +35°C and a supply water temperature of +3 to +25°C. When using air-cooled machines, it is necessary to provide for a...
Read in full
|
|
Photos. Ice maker Brema VM 900A
Video. Ice maker Brema VM 900A
| Subscribe to the video channel food-service.com.ua |
|
Accessories for Ice maker Brema VM 900A
: 99670
Buy
in stock
Water softeners Frosty DVA 8 regenerable. The water softening process extends the life of connected equipment, thereby eliminating unnecessary costs and hassle. The water softener filter operates on the principle of ion exchange of hardness salts (calcium) for sodium ions. Along with the water, hard..
: 76116
Buy
in stock
Nozzle nozzle D20002 for ice makers Brema C150, C300 The nozzle, designed for spraying water in the sprayer, is suitable for the following manufacturers: Brema, Cookmax, Electrolux, IGF, Mastro, MBM, Pizza-Group Models BREMA C150, C300 , C300Split, C80, CB1265 , CB134, CB1565, CB184 , CB246 , CB249 ..
: 55711
Buy
in stock
Water softeners Frosty DVA 12 regenerable. The water softening process extends the life of connected equipment, thereby eliminating unnecessary costs and hassle. The water softener filter operates on the principle of ion exchange of hardness salts (calcium) for sodium ions. Along with the water, har..
: 73124
Buy
in stock
Frosty DVA 16 regenerable water softeners The water softening process extends the life of connected equipment, thereby eliminating unnecessary costs and hassle. The water softener filter operates on the principle of ion exchange of hardness salts (calcium) for sodium ions. Along with the water, hard..
: 78795
Buy
in stock
GoodFood CMA LT 8 Water Softener Filter The water softening process extends the life of connected equipment, thereby eliminating unnecessary costs and hassle. The water softener filter operates on the principle of ion exchange of hardness salts (calcium) for sodium ions. Along with the water, hardne..
|
Spare parts for Ice maker Brema VM 900A
: 76116
Buy
in stock
Nozzle nozzle D20002 for ice makers Brema C150, C300 The nozzle, designed for spraying water in the sprayer, is suitable for the following manufacturers: Brema, Cookmax, Electrolux, IGF, Mastro, MBM, Pizza-Group Models BREMA C150, C300 , C300Split, C80, CB1265 , CB134, CB1565, CB184 , CB246 , CB249 ..
: 89868
Order
made to order
Elco 3FBT 50-40/15 Cooling Fan Motor for Brema, Electrolux, and NTF Ice Makers. Code: N23121 88013 087799 23121
Fits the following models:
Brema: C150, C300 , CB1565 , G250 , G500 , G700Split CO2, M250, M350, M600, M800, TM250, TM450, VB250, VM350, VM500, VM900
Emmepi: C300,..
: 79982
Buy
in stock
Ice maker pump motor, suitable for the following manufacturers: Brema , Cookmax, Electrolux, Everlasting,Kastel , NTF , Rancilio Brema models: M1500, M1500SPLIT, M2000, M2000SPLIT, VM900 Technical specifications: power = 60 W voltage = 220/240 V frequency = 50 Hz connection = 6.3 mm flat plug manufa..
|
-
Technical specifications. Ice maker Brema VM 900A
| Connection type |
to the water supply
|
| Cooling system |
air
|
| Power, W |
300
|
| Productivity, kg/day |
400
|
| Type of ice |
cubic
|
| Overall dimensions (L x W x H), mm |
770x550x805
|
| Weight, кг |
113.00
|
| Water temperature (min/max), °C |
+3/+32
|
| Ambient temperature (min/max), °C |
+10/+43
|
| Ice mass, g |
7
|
| Ambient temperature, °C |
+21
|
| Coolant |
R404a
|
| Water temperature, °C |
+15
|
| Water inlet pressure (min/max), bar |
1/6
|
| Water consumption, l/kg |
1.8
|
| Execution |
stainless steel
|
|
|
-
Description. Ice maker Brema VM 900A
Brema pyramid ice maker. 
Without hopper/storage tank. Vertical evaporator.
Brema ice makers operate on a simple principle. Clean drinking water enters a storage tank and, using a built-in pump, is sprayed through a series of nozzles onto the evaporator, where ice begins to accumulate. Once the ice has filled the entire cooled form, defrosting occurs under the influence of hot refrigerant vapor. The resulting ice cubes fall into the storage bin. The ice maker's bin is always guaranteed to contain the correct amount of cubed ice for the specific model. Just a few scoops from the bin are removed, and the system switches to "freezing" mode. Ice maker designers developed a special technology (the Brema "sprayer" system) that controls the nozzles using a thermostat and timer.
This system also makes it possible to easily replace injectors if necessary, which helps avoid the usual problems associated with the formation of limescale deposits on them during operation.
It should be noted that, although the nozzle monitoring system in Brema ice generators is more expensive than similar systems in devices from other manufacturers, it ensures good reproducibility of ice cubes (in terms of shape, density and geometric parameters) and also ensures a long service life of this equipment.
It's worth noting that most Brema air-cooled units require virtually no condenser cleaning, as they are equipped with special filters that prevent contamination.
Successful operation of ice generators doesn't require any special technical skills. The main thing is proper and professional installation. Installation involves a single-phase AC power connection, a connection to the water supply (with water pressure from 0.1 to 0.6 MPa), and a sewer line. It is recommended to operate the units within an ambient temperature range of +10 to +35°C and a supply water temperature of +3 to +25°C.
When using air-cooled machines, it is necessary to provide for an "air jacket" (approximately 70 mm in volume of the machine) for their installation to allow free air flow to the ice generator fan.
Included. Ice maker Brema VM 900A
- apparatus
- water supply and drain hose
- package
- passport instructions
- certificate
- warranty - 12 months.
About the manufacturer:. Ice maker Brema VM 900A
Brema Ice Makers SpA, founded in 1984, has held a leading position in the global ice machine market since the mid-1990s. Manufacturing and assembly quality is monitored by computerized stations, and all products are inspected by a dedicated research laboratory. This equipment is classified as "tropical grade" and is extremely reliable.
Brema ice makers solve all your ice problems. They produce flake ice (models 902, 1540, and 1555 A/W in the GB series and models 350 and 800 in the MUSTER series), granite ice (models 250, 500, and 1000 in the G series), and the most popular cube ice (the CB series). The choice of model depends on the installation location, the type of ice required, and the quantity.
Our company has been offering the full range of Brema ice makers on the domestic market for several years. Our most popular cube ice makers are available in a wide range of capacities and sizes, including the following models: CB184, 246, 249, 316, 416, 425, 640, 840, 955, 1265, and 1565 A/W.
Buy Ice maker Brema VM 900A by price 227182 грн
text_desc_seo_2
text_desc_seo_3
text_desc_seo_4
Our many years of experience and professionalism have earned us an excellent reputation in the Ukrainian food equipment market. Our competitive prices and product quality will delight you! Happy shopping.
-
Фотографии. Ice maker Brema VM 900A
Видео. Ice maker Brema VM 900A
| Подписаться на видео канал food-service.com.ua |
|
-
Accessories for Ice maker Brema VM 900A
: 99670
Buy
in stock
Water softeners Frosty DVA 8 regenerable. The water softening process extends the life of connected equipment, thereby eliminating unnecessary costs and hassle. The water softener filter operates on the principle of ion exchange of hardness salts (calcium) for sodium ions. Along with the water, hard..
: 76116
Buy
in stock
Nozzle nozzle D20002 for ice makers Brema C150, C300 The nozzle, designed for spraying water in the sprayer, is suitable for the following manufacturers: Brema, Cookmax, Electrolux, IGF, Mastro, MBM, Pizza-Group Models BREMA C150, C300 , C300Split, C80, CB1265 , CB134, CB1565, CB184 , CB246 , CB249 ..
: 55711
Buy
in stock
Water softeners Frosty DVA 12 regenerable. The water softening process extends the life of connected equipment, thereby eliminating unnecessary costs and hassle. The water softener filter operates on the principle of ion exchange of hardness salts (calcium) for sodium ions. Along with the water, har..
: 73124
Buy
in stock
Frosty DVA 16 regenerable water softeners The water softening process extends the life of connected equipment, thereby eliminating unnecessary costs and hassle. The water softener filter operates on the principle of ion exchange of hardness salts (calcium) for sodium ions. Along with the water, hard..
: 78795
Buy
in stock
GoodFood CMA LT 8 Water Softener Filter The water softening process extends the life of connected equipment, thereby eliminating unnecessary costs and hassle. The water softener filter operates on the principle of ion exchange of hardness salts (calcium) for sodium ions. Along with the water, hardne..
|
Spare parts for Ice maker Brema VM 900A
: 76116
Buy
in stock
Nozzle nozzle D20002 for ice makers Brema C150, C300 The nozzle, designed for spraying water in the sprayer, is suitable for the following manufacturers: Brema, Cookmax, Electrolux, IGF, Mastro, MBM, Pizza-Group Models BREMA C150, C300 , C300Split, C80, CB1265 , CB134, CB1565, CB184 , CB246 , CB249 ..
: 89868
Order
made to order
Elco 3FBT 50-40/15 Cooling Fan Motor for Brema, Electrolux, and NTF Ice Makers. Code: N23121 88013 087799 23121
Fits the following models:
Brema: C150, C300 , CB1565 , G250 , G500 , G700Split CO2, M250, M350, M600, M800, TM250, TM450, VB250, VM350, VM500, VM900
Emmepi: C300,..
: 79982
Buy
in stock
Ice maker pump motor, suitable for the following manufacturers: Brema , Cookmax, Electrolux, Everlasting,Kastel , NTF , Rancilio Brema models: M1500, M1500SPLIT, M2000, M2000SPLIT, VM900 Technical specifications: power = 60 W voltage = 220/240 V frequency = 50 Hz connection = 6.3 mm flat plug manufa..
|
|
