-
About everything
- Characteristics
- Description
- Photo / Video(3/4)
- Accessories / Spare parts
-
Technical specifications
| Connection type |
to the water supply |
| Cooling system |
air |
| Hopper capacity, kg |
55 |
| Power, W |
650 |
| Productivity, kg/day |
150 |
| Type of ice |
granulated |
| Overall dimensions (L x W x H), mm |
738x690x1020 |
| Weight, кг |
94.00 |
| Ambient temperature (min/max), °C |
+10/+43 |
| Water consumption, l/kg |
1 |
| Coolant |
R404a |
| Ambient temperature, °C |
+21 |
| Water temperature, °C |
+15 |
| Water inlet pressure (min/max), bar |
1/6 |
| Execution |
stainless steel |
| Water temperature (min/max), °C |
+3/+32 |
All characteristics
Description. Brema GB 1555A Granular Ice Maker
Ice maker Brema GB 1555A. Air cooling. Ice - granulated. Brema ice makers operate on a fairly simple principle. Clean drinking water enters a storage tank and, using a built-in pump, is sprayed through a series of nozzles onto the evaporator, where ice begins to form. Once the ice fills the entire cooled form, defrosting occurs under the influence of hot refrigerant vapor. The resulting ice pieces fall into the storage bin. The ice maker's bin is always guaranteed to hold the correct amount of cubed ice for the specific model. Just a few scoops from the bin are removed, and the system switches to "freezing" mode. Ice maker designers developed a special technology (the Brema "sprayers" system) to control the nozzles' operation using a thermostat and timer. This system also makes it possible to easily replace injectors if necessary, which helps avoid the usual problems associated with the formation of limescale deposits on them during operation. It should be noted that, although the nozzle monitoring system in Brema ice generators is more expensive than similar systems in devices from other manufacturers, it ensures good reproducibility of ice cubes (in terms of shape, density and geometric parameters) and also ensures a long service life of this equipment. It's worth noting that most Brema air-cooled units require virtually no condenser cleaning, as they are equipped with special filters that prevent contamination. Successful operation of ice generators doesn't require any special technical skills. The main thing is proper and professional installation. Installation involves a single-phase AC power connection, a connection to the water supply (with water pressure from 0.1 to 0.6 MPa), and a sewer line. It is recommended to operate the units within an ambient temperature range of +10 to +35°C and a supply water temperature of +3 to +25°C. When using air-cooled machines, it is necessary to provide for an "air jacket" ...
Read in full
|
|
Photos. Brema GB 1555A Granular Ice Maker
Video. Brema GB 1555A Granular Ice Maker
| Subscribe to the video channel food-service.com.ua |
|
Accessories for Brema GB 1555A Granular Ice Maker
: 49800
Buy
in stock
Water softeners DVA LT 8 The water softening process extends the life of connected equipment, thereby eliminating unnecessary costs and hassle. The water softener filter operates on the principle of ion exchange of hardness salts (calcium) for sodium ions. Along with the water, hardness salts enter ..
: 99670
Buy
in stock
Water softeners Frosty DVA 8 regenerable. The water softening process extends the life of connected equipment, thereby eliminating unnecessary costs and hassle. The water softener filter operates on the principle of ion exchange of hardness salts (calcium) for sodium ions. Along with the water, hard..
: 52309
Buy
in stock
Water softeners DVA LT 16 The water softening process extends the life of connected equipment, thereby eliminating unnecessary costs and hassle. The water softener filter operates on the principle of ion exchange of hardness salts (calcium) for sodium ions. Along with the water, hardness salts enter..
: 55711
Buy
in stock
Water softeners Frosty DVA 12 regenerable. The water softening process extends the life of connected equipment, thereby eliminating unnecessary costs and hassle. The water softener filter operates on the principle of ion exchange of hardness salts (calcium) for sodium ions. Along with the water, har..
: 73124
Buy
in stock
Frosty DVA 16 regenerable water softeners The water softening process extends the life of connected equipment, thereby eliminating unnecessary costs and hassle. The water softener filter operates on the principle of ion exchange of hardness salts (calcium) for sodium ions. Along with the water, hard..
: 15490
Order
made to order
Water softener for combi steamers, connected coffee machines, dishwashers. Water softening is based on the principle of ion exchange, in which water passes through a container filled with a special synthetic resin (cation) saturated with sodium ions. The amount of salt for regeneration is 1.5 kg. Ro..
: 78795
Buy
in stock
GoodFood CMA LT 8 Water Softener Filter The water softening process extends the life of connected equipment, thereby eliminating unnecessary costs and hassle. The water softener filter operates on the principle of ion exchange of hardness salts (calcium) for sodium ions. Along with the water, hardne..
|
Spare parts for Brema GB 1555A Granular Ice Maker
: 81217
Order
made to order
Thrust bearing for Brema GB1555 ice maker..
: 53846
Buy
in stock
Specifications: 2 contacts, 6A 250V, capillary tube length ― 1500 mm, temperature range ― from +1.0°C to +8.5°C, temperature is adjusted with a screw. Ranco R23005, K50L3121, K50L3383 tank thermostat fits the following models: BREMA : C150, C150-CubeA, C80, C80-CubeA, CB1265, CB1265-CubeA, CB134, CB..
: 78794
Order
made to order
Motor reducer FIR 2612.4253, code 23532 926099 809160 for ice makers Brema, NTF, Mastro, Brice Fits these models. BREMA: G150, GB1540 , GB1555 , GB902 , GB903, TB1405, TB852 EMMEPI: GB902 NTF: SLF190 , SLF320, SLF355..
: 26318
Buy
in stock
Suitable for manufacturers Brema, NTF, Cookmax, Electrolux Models: G150, G160, GB1540 , GB1555 , GB601 , GB902 , GB903, SLF190 , SLF225, SLF320, SLF355 Technical specifications: shaft diameter = 30 mm outer diameter = 62 mm width = 42 mm type = 500-4251 standard = DIN 711..
: 58261
Order
made to order
Thrust bearing for Brema GB1555 ice maker..
: 45976
Buy
in stock
Evaporator seal, ceramic seal Brema 20937, for G160, GB1540 Suitable for models: G150, G160, GB1540 , GB1555 , GB601 , GB902 , GB903 , TB1404, TB1405, TB551, TB852 Technical specifications: inner diameter = 26 mm outer diameter = 39.2 mm material thickness = 9.4 mm height = 38.5 mm..
: 33827
Order
made to order
Reduction ring 20785 for Brema ice maker 20785 Suitable for manufacturers Brema , Emmeri, NTF , Cookmax, Mastro Models: G150, G160, GB1540 , GB1555 , GB601 , GB902 , GB903, TB1404, TB1405, TB551, TB852, SLF190 , SLF225, SLF320, SLF355, SLT170 Technical specifications: outer diameter = 54 mm inner di..
: 37623
Buy
in stock
Thermal protection C23114 with a 24 mm hole spacing for Brema ice makers . Also installed in Alpeninox, Electrolux, Fagor, and Zanussi equipment. Compatible with models: BREMA: ice maker C150, C80, CB1265, CB1565, CB184, CB246, CB249, CB316, CB416, CB425, CB640, CB674, CB840, CB955, DSS42, FM, FM..
: 61731
Order
made to order
Ice maker door Suitable for manufacturers Brema, Cookmax, IGF Models: CB1265 , CB1565 , CB640 , CB674 , CB840 , CB955 , GB1540 , GB1555 , IF75, IMF80, TB1404, TB1405, VB250, FCB-120, FCB-130, FCB-155, FCB-60, FCB-90, FHE-140, FHE-150, FHE-150A-W, IcemakerCB640, CB955, IcemakerIMF80A (730014), IMF80..
: 35503
Buy
in stock
Suitable for manufacturers: Brema , Zanussi, Groen, Mastro, MBM, NTF Technical specifications: length = 69 mm width = 23 mm inner diameter = 8 mm..
: 96163
Order
made to order
Suitable for manufacturers Brema , Cookmax Technical specifications: height 65 mm inner diameter 22 mm O.D. 69 mm hole diameter 6 mm bearing diameter 42 mm Brema: G150, G160, GB1540 , GB1555 , GB601, GB902 , GB903 , GB1540, GB902 NTF: SLF190 , SLF225, SLF320, SLF355..
|
-
Technical specifications. Brema GB 1555A Granular Ice Maker
| Connection type |
to the water supply
|
| Cooling system |
air
|
| Hopper capacity, kg |
55
|
| Power, W |
650
|
| Productivity, kg/day |
150
|
| Type of ice |
granulated
|
| Overall dimensions (L x W x H), mm |
738x690x1020
|
| Weight, кг |
94.00
|
| Ambient temperature (min/max), °C |
+10/+43
|
| Water consumption, l/kg |
1
|
| Coolant |
R404a
|
| Ambient temperature, °C |
+21
|
| Water temperature, °C |
+15
|
| Water inlet pressure (min/max), bar |
1/6
|
| Execution |
stainless steel
|
| Water temperature (min/max), °C |
+3/+32
|
|
|
-
Description. Brema GB 1555A Granular Ice Maker
Ice maker Brema GB 1555A.
Air cooling.
Ice - granulated.
 Brema ice makers operate on a fairly simple principle. Clean drinking water enters a storage tank and, using a built-in pump, is sprayed through a series of nozzles onto the evaporator, where ice begins to form. Once the ice fills the entire cooled form, defrosting occurs under the influence of hot refrigerant vapor. The resulting ice pieces fall into the storage bin. The ice maker's bin is always guaranteed to hold the correct amount of cubed ice for the specific model. Just a few scoops from the bin are removed, and the system switches to "freezing" mode. Ice maker designers developed a special technology (the Brema "sprayers" system) to control the nozzles' operation using a thermostat and timer.
This system also makes it possible to easily replace injectors if necessary, which helps avoid the usual problems associated with the formation of limescale deposits on them during operation.
It should be noted that, although the nozzle monitoring system in Brema ice generators is more expensive than similar systems in devices from other manufacturers, it ensures good reproducibility of ice cubes (in terms of shape, density and geometric parameters) and also ensures a long service life of this equipment.
It's worth noting that most Brema air-cooled units require virtually no condenser cleaning, as they are equipped with special filters that prevent contamination.
Successful operation of ice generators doesn't require any special technical skills. The main thing is proper and professional installation. Installation involves a single-phase AC power connection, a connection to the water supply (with water pressure from 0.1 to 0.6 MPa), and a sewer line. It is recommended to operate the units within an ambient temperature range of +10 to +35°C and a supply water temperature of +3 to +25°C.
When using air-cooled machines, it is necessary to provide for an "air jacket" (approximately 70 mm in volume of the machine) for their installation to allow free air flow to the ice generator fan.
Included. Brema GB 1555A Granular Ice Maker
- apparatus
- water supply and drain hose
- package
- passport instructions
- certificate
- warranty - 12 months.
About the manufacturer:. Brema GB 1555A Granular Ice Maker
Brema Ice Makers SpA, founded in 1984, has held a leading position in the global ice machine market since the mid-1990s. Manufacturing and assembly quality is monitored by computerized stations, and all products are inspected by a dedicated research laboratory. This equipment is classified as "tropical grade" and is extremely reliable.
Brema ice makers solve all your ice problems. They produce flake ice (models 902, 1540, and 1555 A/W in the GB series and models 350 and 800 in the MUSTER series), granite ice (models 250, 500, and 1000 in the G series), and the most popular cube ice (the CB series). The choice of model depends on the installation location, the type of ice required, and the quantity.
Our company has been offering the full range of Brema ice makers on the domestic market for several years. Our most popular cube ice makers are available in a wide range of capacities and sizes, including the following models: CB184, 246, 249, 316, 416, 425, 640, 840, 955, 1265, and 1565 A/W.
Buy Brema GB 1555A Granular Ice Maker by price 120811 грн
text_desc_seo_2
text_desc_seo_3
text_desc_seo_4
Our many years of experience and professionalism have earned us an excellent reputation in the Ukrainian food equipment market. Our competitive prices and product quality will delight you! Happy shopping.
-
Фотографии. Brema GB 1555A Granular Ice Maker
Видео. Brema GB 1555A Granular Ice Maker
| Подписаться на видео канал food-service.com.ua |
|
-
Accessories for Brema GB 1555A Granular Ice Maker
: 49800
Buy
in stock
Water softeners DVA LT 8 The water softening process extends the life of connected equipment, thereby eliminating unnecessary costs and hassle. The water softener filter operates on the principle of ion exchange of hardness salts (calcium) for sodium ions. Along with the water, hardness salts enter ..
: 99670
Buy
in stock
Water softeners Frosty DVA 8 regenerable. The water softening process extends the life of connected equipment, thereby eliminating unnecessary costs and hassle. The water softener filter operates on the principle of ion exchange of hardness salts (calcium) for sodium ions. Along with the water, hard..
: 52309
Buy
in stock
Water softeners DVA LT 16 The water softening process extends the life of connected equipment, thereby eliminating unnecessary costs and hassle. The water softener filter operates on the principle of ion exchange of hardness salts (calcium) for sodium ions. Along with the water, hardness salts enter..
: 55711
Buy
in stock
Water softeners Frosty DVA 12 regenerable. The water softening process extends the life of connected equipment, thereby eliminating unnecessary costs and hassle. The water softener filter operates on the principle of ion exchange of hardness salts (calcium) for sodium ions. Along with the water, har..
: 73124
Buy
in stock
Frosty DVA 16 regenerable water softeners The water softening process extends the life of connected equipment, thereby eliminating unnecessary costs and hassle. The water softener filter operates on the principle of ion exchange of hardness salts (calcium) for sodium ions. Along with the water, hard..
: 15490
Order
made to order
Water softener for combi steamers, connected coffee machines, dishwashers. Water softening is based on the principle of ion exchange, in which water passes through a container filled with a special synthetic resin (cation) saturated with sodium ions. The amount of salt for regeneration is 1.5 kg. Ro..
: 78795
Buy
in stock
GoodFood CMA LT 8 Water Softener Filter The water softening process extends the life of connected equipment, thereby eliminating unnecessary costs and hassle. The water softener filter operates on the principle of ion exchange of hardness salts (calcium) for sodium ions. Along with the water, hardne..
|
Spare parts for Brema GB 1555A Granular Ice Maker
: 81217
Order
made to order
Thrust bearing for Brema GB1555 ice maker..
: 53846
Buy
in stock
Specifications: 2 contacts, 6A 250V, capillary tube length ― 1500 mm, temperature range ― from +1.0°C to +8.5°C, temperature is adjusted with a screw. Ranco R23005, K50L3121, K50L3383 tank thermostat fits the following models: BREMA : C150, C150-CubeA, C80, C80-CubeA, CB1265, CB1265-CubeA, CB134, CB..
: 78794
Order
made to order
Motor reducer FIR 2612.4253, code 23532 926099 809160 for ice makers Brema, NTF, Mastro, Brice Fits these models. BREMA: G150, GB1540 , GB1555 , GB902 , GB903, TB1405, TB852 EMMEPI: GB902 NTF: SLF190 , SLF320, SLF355..
: 26318
Buy
in stock
Suitable for manufacturers Brema, NTF, Cookmax, Electrolux Models: G150, G160, GB1540 , GB1555 , GB601 , GB902 , GB903, SLF190 , SLF225, SLF320, SLF355 Technical specifications: shaft diameter = 30 mm outer diameter = 62 mm width = 42 mm type = 500-4251 standard = DIN 711..
: 58261
Order
made to order
Thrust bearing for Brema GB1555 ice maker..
: 45976
Buy
in stock
Evaporator seal, ceramic seal Brema 20937, for G160, GB1540 Suitable for models: G150, G160, GB1540 , GB1555 , GB601 , GB902 , GB903 , TB1404, TB1405, TB551, TB852 Technical specifications: inner diameter = 26 mm outer diameter = 39.2 mm material thickness = 9.4 mm height = 38.5 mm..
: 33827
Order
made to order
Reduction ring 20785 for Brema ice maker 20785 Suitable for manufacturers Brema , Emmeri, NTF , Cookmax, Mastro Models: G150, G160, GB1540 , GB1555 , GB601 , GB902 , GB903, TB1404, TB1405, TB551, TB852, SLF190 , SLF225, SLF320, SLF355, SLT170 Technical specifications: outer diameter = 54 mm inner di..
: 37623
Buy
in stock
Thermal protection C23114 with a 24 mm hole spacing for Brema ice makers . Also installed in Alpeninox, Electrolux, Fagor, and Zanussi equipment. Compatible with models: BREMA: ice maker C150, C80, CB1265, CB1565, CB184, CB246, CB249, CB316, CB416, CB425, CB640, CB674, CB840, CB955, DSS42, FM, FM..
: 61731
Order
made to order
Ice maker door Suitable for manufacturers Brema, Cookmax, IGF Models: CB1265 , CB1565 , CB640 , CB674 , CB840 , CB955 , GB1540 , GB1555 , IF75, IMF80, TB1404, TB1405, VB250, FCB-120, FCB-130, FCB-155, FCB-60, FCB-90, FHE-140, FHE-150, FHE-150A-W, IcemakerCB640, CB955, IcemakerIMF80A (730014), IMF80..
: 35503
Buy
in stock
Suitable for manufacturers: Brema , Zanussi, Groen, Mastro, MBM, NTF Technical specifications: length = 69 mm width = 23 mm inner diameter = 8 mm..
: 96163
Order
made to order
Suitable for manufacturers Brema , Cookmax Technical specifications: height 65 mm inner diameter 22 mm O.D. 69 mm hole diameter 6 mm bearing diameter 42 mm Brema: G150, G160, GB1540 , GB1555 , GB601, GB902 , GB903 , GB1540, GB902 NTF: SLF190 , SLF225, SLF320, SLF355..
|
|
-150x150.jpg "Thrust bearing for Brema ice maker GB1555 (4252)")
