-
About everything
- Characteristics
- Description
- Photo / Video(2/1)
- Accessories / Spare parts
-
Technical specifications
| Connection type |
to the water supply |
| Cooling system |
air |
| Power, W |
650 |
| Productivity, kg/day |
150 |
| Type of ice |
scaly |
| Overall dimensions (L x W x H), mm |
640x470x555 |
| Weight, кг |
59.00 |
| Water consumption, l/kg |
1 |
| Water inlet pressure (min/max), bar |
1/6 |
| Coolant |
R404a |
| Water temperature (min/max), °C |
+3/+32 |
| Ambient temperature (min/max), °C |
+10/+43 |
All characteristics
Description. Brema G 150A Flake Ice Maker
Ice generator. Air cooling. Flake ice. Without a bin/storage tank. Brema ice makers operate on a fairly simple principle. Clean drinking water enters a storage tank and, using a built-in pump, is sprayed through a series of nozzles onto the evaporator, where ice begins to form. Once the ice fills the entire cooled form, defrosting occurs under the influence of hot refrigerant vapor. The resulting ice pieces fall into the storage bin. The ice maker's bin is always guaranteed to hold the correct amount of cubed ice for the specific model. Just a few scoops from the bin are removed, and the system switches to "freezing" mode. Ice maker designers developed a special technology (the Brema "sprayers" system) to control the nozzles' operation using a thermostat and timer. This system also makes it possible to easily replace injectors if necessary, which helps avoid the usual problems associated with the formation of limescale deposits on them during operation. It should be noted that, although the nozzle monitoring system in Brema ice generators is more expensive than similar systems in devices from other manufacturers, it ensures good reproducibility of ice cubes (in terms of shape, density and geometric parameters) and also ensures a long service life of this equipment. It's worth noting that most Brema air-cooled units require virtually no condenser cleaning, as they are equipped with special filters that prevent contamination. Successful operation of ice generators doesn't require any special technical skills. The main thing is proper and professional installation. Installation involves a single-phase AC power connection, a connection to the water supply (with water pressure from 0.1 to 0.6 MPa), and a sewer line. It is recommended to operate the units within an ambient temperature range of +10 to +35°C and a supply water temperature of +3 to +25°C. When using air-cooled machines, it is necessary to provide for an "...
Read in full
|
|
Photos. Brema G 150A Flake Ice Maker
Video. Brema G 150A Flake Ice Maker
| Subscribe to the video channel food-service.com.ua |
|
Accessories for Brema G 150A Flake Ice Maker
: 99670
Buy
in stock
Water softeners Frosty DVA 8 regenerable. The water softening process extends the life of connected equipment, thereby eliminating unnecessary costs and hassle. The water softener filter operates on the principle of ion exchange of hardness salts (calcium) for sodium ions. Along with the water, hard..
: 55711
Buy
in stock
Water softeners Frosty DVA 12 regenerable. The water softening process extends the life of connected equipment, thereby eliminating unnecessary costs and hassle. The water softener filter operates on the principle of ion exchange of hardness salts (calcium) for sodium ions. Along with the water, har..
: 73124
Buy
in stock
Frosty DVA 16 regenerable water softeners The water softening process extends the life of connected equipment, thereby eliminating unnecessary costs and hassle. The water softener filter operates on the principle of ion exchange of hardness salts (calcium) for sodium ions. Along with the water, hard..
: 78795
Buy
in stock
GoodFood CMA LT 8 Water Softener Filter The water softening process extends the life of connected equipment, thereby eliminating unnecessary costs and hassle. The water softener filter operates on the principle of ion exchange of hardness salts (calcium) for sodium ions. Along with the water, hardne..
|
Spare parts for Brema G 150A Flake Ice Maker
: 37623
Buy
in stock
Thermal protection C23114 with a 24 mm hole spacing for Brema ice makers . Also installed in Alpeninox, Electrolux, Fagor, and Zanussi equipment. Compatible with models: BREMA: ice maker C150, C80, CB1265, CB1565, CB184, CB246, CB249, CB316, CB416, CB425, CB640, CB674, CB840, CB955, DSS42, FM, FM..
: 93230
Buy
in stock
Thrust bearing CR 500 - 4252 160126 for ice makers Brema, Electrolux, Zanussi and others. BREMA ice makers G150 , G160, GB1540, GB1555, GB601, GB902 , GB903 EMMEPI ice makers GB1540, GB902 NTF ice makers SLF190 , SLF225, SLF320, SLF355 Inner diameter - 19 mm Outer diameter - 40 mm Total height - 30 ..
: 28313
Buy
in stock
Evaporator seal, ceramic seal Brema 20633, GB902, GB903 BREMA ice makers G150 , G160, GB1540, GB1555, GB601, GB902 , GB903 EMMEPI ice makers GB1540, GB902 NTF ice makers SLF190 , SLF225, SLF320, SLF355..
|
-
Technical specifications. Brema G 150A Flake Ice Maker
| Connection type |
to the water supply
|
| Cooling system |
air
|
| Power, W |
650
|
| Productivity, kg/day |
150
|
| Type of ice |
scaly
|
| Overall dimensions (L x W x H), mm |
640x470x555
|
| Weight, кг |
59.00
|
| Water consumption, l/kg |
1
|
| Water inlet pressure (min/max), bar |
1/6
|
| Coolant |
R404a
|
| Water temperature (min/max), °C |
+3/+32
|
| Ambient temperature (min/max), °C |
+10/+43
|
|
|
-
Description. Brema G 150A Flake Ice Maker
Ice generator.
Air cooling.
Flake ice. Without a bin/storage tank. 
Brema ice makers operate on a fairly simple principle. Clean drinking water enters a storage tank and, using a built-in pump, is sprayed through a series of nozzles onto the evaporator, where ice begins to form. Once the ice fills the entire cooled form, defrosting occurs under the influence of hot refrigerant vapor. The resulting ice pieces fall into the storage bin. The ice maker's bin is always guaranteed to hold the correct amount of cubed ice for the specific model. Just a few scoops from the bin are removed, and the system switches to "freezing" mode. Ice maker designers developed a special technology (the Brema "sprayers" system) to control the nozzles' operation using a thermostat and timer.
This system also makes it possible to easily replace injectors if necessary, which helps avoid the usual problems associated with the formation of limescale deposits on them during operation.
It should be noted that, although the nozzle monitoring system in Brema ice generators is more expensive than similar systems in devices from other manufacturers, it ensures good reproducibility of ice cubes (in terms of shape, density and geometric parameters) and also ensures a long service life of this equipment.
It's worth noting that most Brema air-cooled units require virtually no condenser cleaning, as they are equipped with special filters that prevent contamination.
Successful operation of ice generators doesn't require any special technical skills. The main thing is proper and professional installation. Installation involves a single-phase AC power connection, a connection to the water supply (with water pressure from 0.1 to 0.6 MPa), and a sewer line. It is recommended to operate the units within an ambient temperature range of +10 to +35°C and a supply water temperature of +3 to +25°C.
When using air-cooled machines, it is necessary to provide for an "air jacket" (approximately 70 mm in volume of the machine) for their installation to allow free air flow to the ice generator fan.
Included. Brema G 150A Flake Ice Maker
- apparatus
- water supply and drain hose
- package
- passport instructions
- certificate
- warranty - 12 months.
. Brema G 150A Flake Ice Maker
Brema Ice Makers SpA, founded in 1984, has held a leading position in the global ice machine market since the mid-1990s. Manufacturing and assembly quality is monitored by computerized stations, and all products are inspected by a dedicated research laboratory. This equipment is classified as "tropical grade" and is extremely reliable.
Brema ice makers solve all your ice problems. They produce flake ice (models 902, 1540, and 1555 A/W in the GB series and models 350 and 800 in the MUSTER series), granite ice (models 250, 500, and 1000 in the G series), and the most popular cube ice (the CB series). The choice of model depends on the installation location, the type of ice required, and the quantity.
Our company has been offering the full range of Brema ice makers on the domestic market for several years. Our most popular cube ice makers are available in a wide range of capacities and sizes, including the following models: CB184, 246, 249, 316, 416, 425, 640, 840, 955, 1265, and 1565 A/W.
Buy Brema G 150A Flake Ice Maker by price 116912 грн
text_desc_seo_2
text_desc_seo_3
text_desc_seo_4
Our many years of experience and professionalism have earned us an excellent reputation in the Ukrainian food equipment market. Our competitive prices and product quality will delight you! Happy shopping.
-
Фотографии. Brema G 150A Flake Ice Maker
Видео. Brema G 150A Flake Ice Maker
| Подписаться на видео канал food-service.com.ua |
|
-
Accessories for Brema G 150A Flake Ice Maker
: 99670
Buy
in stock
Water softeners Frosty DVA 8 regenerable. The water softening process extends the life of connected equipment, thereby eliminating unnecessary costs and hassle. The water softener filter operates on the principle of ion exchange of hardness salts (calcium) for sodium ions. Along with the water, hard..
: 55711
Buy
in stock
Water softeners Frosty DVA 12 regenerable. The water softening process extends the life of connected equipment, thereby eliminating unnecessary costs and hassle. The water softener filter operates on the principle of ion exchange of hardness salts (calcium) for sodium ions. Along with the water, har..
: 73124
Buy
in stock
Frosty DVA 16 regenerable water softeners The water softening process extends the life of connected equipment, thereby eliminating unnecessary costs and hassle. The water softener filter operates on the principle of ion exchange of hardness salts (calcium) for sodium ions. Along with the water, hard..
: 78795
Buy
in stock
GoodFood CMA LT 8 Water Softener Filter The water softening process extends the life of connected equipment, thereby eliminating unnecessary costs and hassle. The water softener filter operates on the principle of ion exchange of hardness salts (calcium) for sodium ions. Along with the water, hardne..
|
Spare parts for Brema G 150A Flake Ice Maker
: 37623
Buy
in stock
Thermal protection C23114 with a 24 mm hole spacing for Brema ice makers . Also installed in Alpeninox, Electrolux, Fagor, and Zanussi equipment. Compatible with models: BREMA: ice maker C150, C80, CB1265, CB1565, CB184, CB246, CB249, CB316, CB416, CB425, CB640, CB674, CB840, CB955, DSS42, FM, FM..
: 93230
Buy
in stock
Thrust bearing CR 500 - 4252 160126 for ice makers Brema, Electrolux, Zanussi and others. BREMA ice makers G150 , G160, GB1540, GB1555, GB601, GB902 , GB903 EMMEPI ice makers GB1540, GB902 NTF ice makers SLF190 , SLF225, SLF320, SLF355 Inner diameter - 19 mm Outer diameter - 40 mm Total height - 30 ..
: 28313
Buy
in stock
Evaporator seal, ceramic seal Brema 20633, GB902, GB903 BREMA ice makers G150 , G160, GB1540, GB1555, GB601, GB902 , GB903 EMMEPI ice makers GB1540, GB902 NTF ice makers SLF190 , SLF225, SLF320, SLF355..
|
|
