-
About everything
- Characteristics
- Description
- Photo / Video(5/0)
- Accessories / Spare parts
-
Technical specifications
| Connection type |
to the water supply |
| Cooling system |
water |
| Hopper capacity, kg |
25 |
| Power, W |
460 |
| Productivity, kg/day |
45 |
| Type of ice |
cubic |
| Overall dimensions (L x W x H), mm |
497x592x887 |
| Weight, кг |
55.00 |
| Ice parameters |
cube m, 35x31x31mm, 17g |
| Water temperature, °C |
+15 |
| Water consumption, l/kg |
15 |
| Water temperature (min/max), °C |
+3/+32 |
| Ambient temperature (min/max), °C |
+10/+43 |
| Execution |
stainless steel |
| Ambient temperature, °C |
+21 |
| Water inlet pressure (min/max), bar |
1/6 |
| Coolant |
R290 |
All characteristics
Description. Ice cube maker NTF-SL110W R290
Ice cube maker NTF-SL110W. The NTF SL series models are ideal for built-in bar counters thanks to their full front serviceability and water cooling. The system is water-cooled and requires no side or rear air supply. The ability to integrate an ice maker is crucial in bars where every centimeter counts. In this case, a water-cooled ice maker is ideal. Ice makers operate on a fairly simple principle. Clean drinking water enters a storage tank and, using a built-in pump, is sprayed through a series of nozzles onto the evaporator, where ice begins to accumulate. Once the ice has filled the entire cooled form, defrosting occurs under the influence of hot refrigerant vapor. The resulting ice cubes fall into the storage bin. The ice maker's bin is always guaranteed to contain the correct amount of cubed ice for the specific model. Just a few scoops from the bin are removed, and the system switches to "freezing" mode. Ice maker designers developed a special technology (a "sprayer" system) that controls the nozzles using a thermostat and timer. This system also makes it possible to easily replace injectors if necessary, which helps avoid the usual problems associated with the formation of limescale deposits on them during operation. Successful operation of ice generators doesn't require any special technical skills. The main thing is proper and professional installation. Installation involves a single-phase AC power connection, a connection to the water supply (with water pressure from 0.1 to 0.6 MPa), and a sewer line. It is recommended to operate the units within an ambient temperature range of +10 to +43°C and a supply water temperature of +3 to +32°C. ...
Read in full
|
|
Photos. Ice cube maker NTF-SL110W R290
Accessories for Ice cube maker NTF-SL110W R290
: 99670
Buy
in stock
Water softeners Frosty DVA 8 regenerable. The water softening process extends the life of connected equipment, thereby eliminating unnecessary costs and hassle. The water softener filter operates on the principle of ion exchange of hardness salts (calcium) for sodium ions. Along with the water, hard..
: 55711
Buy
in stock
Water softeners Frosty DVA 12 regenerable. The water softening process extends the life of connected equipment, thereby eliminating unnecessary costs and hassle. The water softener filter operates on the principle of ion exchange of hardness salts (calcium) for sodium ions. Along with the water, har..
: 73124
Buy
in stock
Frosty DVA 16 regenerable water softeners The water softening process extends the life of connected equipment, thereby eliminating unnecessary costs and hassle. The water softener filter operates on the principle of ion exchange of hardness salts (calcium) for sodium ions. Along with the water, hard..
: 78795
Buy
in stock
GoodFood CMA LT 8 Water Softener Filter The water softening process extends the life of connected equipment, thereby eliminating unnecessary costs and hassle. The water softener filter operates on the principle of ion exchange of hardness salts (calcium) for sodium ions. Along with the water, hardne..
|
-
Technical specifications. Ice cube maker NTF-SL110W R290
| Connection type |
to the water supply
|
| Cooling system |
water
|
| Hopper capacity, kg |
25
|
| Power, W |
460
|
| Productivity, kg/day |
45
|
| Type of ice |
cubic
|
| Overall dimensions (L x W x H), mm |
497x592x887
|
| Weight, кг |
55.00
|
| Ice parameters |
cube m, 35x31x31mm, 17g
|
| Water temperature, °C |
+15
|
| Water consumption, l/kg |
15
|
| Water temperature (min/max), °C |
+3/+32
|
| Ambient temperature (min/max), °C |
+10/+43
|
| Execution |
stainless steel
|
| Ambient temperature, °C |
+21
|
| Water inlet pressure (min/max), bar |
1/6
|
| Coolant |
R290
|
|
|
-
Description. Ice cube maker NTF-SL110W R290
Ice cube maker NTF-SL110W.  The NTF SL series models are ideal for built-in bar counters thanks to their full front serviceability and water cooling.
The system is water-cooled and requires no side or rear air supply. The ability to integrate an ice maker is crucial in bars where every centimeter counts. In this case, a water-cooled ice maker is ideal.
Ice makers operate on a fairly simple principle. Clean drinking water enters a storage tank and, using a built-in pump, is sprayed through a series of nozzles onto the evaporator, where ice begins to accumulate. Once the ice has filled the entire cooled form, defrosting occurs under the influence of hot refrigerant vapor. The resulting ice cubes fall into the storage bin. The ice maker's bin is always guaranteed to contain the correct amount of cubed ice for the specific model. Just a few scoops from the bin are removed, and the system switches to "freezing" mode. Ice maker designers developed a special technology (a "sprayer" system) that controls the nozzles using a thermostat and timer.
This system also makes it possible to easily replace injectors if necessary, which helps avoid the usual problems associated with the formation of limescale deposits on them during operation.
Successful operation of ice generators doesn't require any special technical skills. The main thing is proper and professional installation. Installation involves a single-phase AC power connection, a connection to the water supply (with water pressure from 0.1 to 0.6 MPa), and a sewer line. It is recommended to operate the units within an ambient temperature range of +10 to +43°C and a supply water temperature of +3 to +32°C.
Included. Ice cube maker NTF-SL110W R290
- apparatus
- water supply and drain hose
- package
- passport instructions
- certificate
- warranty - 12 months.
Buy Ice cube maker NTF-SL110W R290 by price 78838 грн
text_desc_seo_2
text_desc_seo_3
text_desc_seo_4
Our many years of experience and professionalism have earned us an excellent reputation in the Ukrainian food equipment market. Our competitive prices and product quality will delight you! Happy shopping.
-
Фотографии. Ice cube maker NTF-SL110W R290
-
Accessories for Ice cube maker NTF-SL110W R290
: 99670
Buy
in stock
Water softeners Frosty DVA 8 regenerable. The water softening process extends the life of connected equipment, thereby eliminating unnecessary costs and hassle. The water softener filter operates on the principle of ion exchange of hardness salts (calcium) for sodium ions. Along with the water, hard..
: 55711
Buy
in stock
Water softeners Frosty DVA 12 regenerable. The water softening process extends the life of connected equipment, thereby eliminating unnecessary costs and hassle. The water softener filter operates on the principle of ion exchange of hardness salts (calcium) for sodium ions. Along with the water, har..
: 73124
Buy
in stock
Frosty DVA 16 regenerable water softeners The water softening process extends the life of connected equipment, thereby eliminating unnecessary costs and hassle. The water softener filter operates on the principle of ion exchange of hardness salts (calcium) for sodium ions. Along with the water, hard..
: 78795
Buy
in stock
GoodFood CMA LT 8 Water Softener Filter The water softening process extends the life of connected equipment, thereby eliminating unnecessary costs and hassle. The water softener filter operates on the principle of ion exchange of hardness salts (calcium) for sodium ions. Along with the water, hardne..
|
|
