Description. Celme FAMILY 300 slicer (body painted grey)
The CELME FAMILY 300 slicer is designed for slicing sausages, ham, fresh and roast meats, cheeses, vegetables, rolls, and more. The FAMILY series slicer is equipped with a sharpening device, allowing you to keep the cutting edge of the knife sharp at all times.
The slicer blade is made of stainless steel with a non-stick surface. The blade surface is guaranteed to be corrosion-resistant for 6 years, in accordance with Directive 2002/95.
The FAMILY series slicers are designed for short operating times. The 275 slicer is intended for use in medium- and low-volume food service establishments, as well as in grocery stores. Important! After 15 minutes of operation, the motor requires a 5-10 minute break to ensure safe and long-lasting operation.
- the body is made of painted aluminum, suitable for use with food products,
- has a convenient carriage that moves easily on bearings,
- blade made of chrome-plated hardened steel,
- powerful and quiet engine,
- a device for sharpening a blade
All this ensures professional cutting, safety and ease of use and maintenance of the slicer.
The body is painted.
Cutting area, mm 230-195.
Ventilated motor.
Protective ring.
Knife holder with double ball bearing.
Fixed carriage.
Belt drive.
The finger protector is made of aluminum.
Removable sharpening device.
FY series slicers are equipped with a removable sharpening unit, which is attached to the moving carriage. Use the dial to set the maximum cutting size to 15 mm. Attach the sharpening unit to the slicing plate support and position it so that the blade fits between the sharpening stones. Turn on the disk rotation, sharpen the disk with the lower stone for 5-10 seconds, then press the upper button for a few seconds to remove burrs. When finished sharpening, turn off the rotation and remove the sharpening unit.
All sliding parts should be periodically lubricated with Vaseline oil. Never use vegetable or olive oil. Using an oiler, inject the lubricant into the designated holes. Models with a 220mm blade have a hole on the right side of the carriage; models with a 250mm blade have an additional hole near the control panel.
Founded in 1971, C.EL.ME manufactures professional food industry equipment, including slicers, vegetable cutters, meat grinders, meat cutters, and specialized pizzeria equipment. All equipment is European certified and exported worldwide. Products under the Celme Electric brand have become well-known in the market, establishing the company as a leader in the professional equipment industry.
In 2005, C.EL.ME opened a new branch in Ukraine to manufacture and sell equipment on the domestic market.
The Zhytomyr facility processes and assembles products using Italian materials and components. All equipment and production technology are identical to those produced in Italy, ensuring the quality of products made in Italy. All products sold on the Ukrainian market are UkrSEPRO certified and meet GOST requirements.
Included. Celme FAMILY 300 slicer (body painted grey)
- slicer, pcs - 1
- packaging, pcs - 1
- passport, pcs - 1
- 12-month warranty card
