Description. Blender Gemlux GL-PB-888P
The Gemlux GL-PB9200T blender is designed for preparing cocktails of all different consistencies and ingredients, fruit and vegetable drinks, smoothies, and more. It also features an ice crusher, which quickly produces crushed ice, often used in cocktails.
- Ice crushing mode
- Smoothie making mode
- Smooth speed control and pulse mode
Smooth speed control and 6 preset operating modes (ice, vegetables, fruits, nuts, soy milk, smoothies) allow you to perform a wide variety of kitchen operations
The equipment is designed to operate in intermittent short-term mode with a working cycle duration of no more than 5 minutes.
This means that after every 5 minutes of work a technological break of at least 5 minutes is required.
Using the capabilities of the Gemlux GL-PB-888P blender can significantly expand the variety of dishes offered to guests. This blender is ideal for use in any small-volume catering establishment.
The package includes a plastic pusher, which can be used to quickly prepare thick purees, nut butter, and even ice cream.
Included. Blender Gemlux GL-PB-888P
- engine block, pcs. - 1;
- flask (glass), pcs. -1;
- package
- passport
- 12 months warranty for non-commercial use.
Brief instructions for the blender. Blender Gemlux GL-PB-888P
Detailed instructions can be downloaded from the Technical Specifications tab.
PASSPORT Blender CONTENT IMPORTANT SAFETY RULES When working with this electrical appliance, basic safety precautions should always be followed, including the following:
1. Read the instructions completely.
2. Before use, make sure that the voltage indicated on the device matches the voltage in your electrical network.
3. Ensure that the cord does not come into contact with hot surfaces or hang over the edge of a table or shelf.
4. Do not use the appliance if the cord or plug is damaged, or if it malfunctions or has been damaged in any way. Always have it inspected, repaired, or adjusted by a qualified technician.
5. If the power cord is damaged, it must be replaced by a service center or a qualified technician.
6. Adult presence is required if the device is used by or is near a child.
7. Do not touch moving parts.
8. To avoid serious injury and damage to the blender, do not place hands or utensils in the blender container while it is in operation. A scraper may be used, but only when the blender is turned off.
9. To avoid injury or damage, use only approved or manufacturer-purchased attachments, including the cup, cup lid, and blades.
10. The device cannot be used to mix solid and dry substances, otherwise the blade will become dull.
11. Unplug the appliance when changing attachments or before cleaning.
12. To reduce the risk of injury, first secure the cup properly and firmly before placing the blades in it.
13. This appliance is not intended for use by persons (including children) with reduced physical, sensory or mental capabilities, or lack of experience and knowledge, unless they have been given supervision or instruction concerning use of the appliance by a person responsible for their safety.
14. Do not leave the device unattended.
15. Before removing the blender from the motor, make sure the blades have stopped completely.
16. Always use the blender with the lid closed.
17. Always install the device on an isolated, dry, level surface.
18. Never place the appliance on or near a gas or electric burner, or close to heating devices.
19. For indoor use only.
20. Use the device strictly for its intended purpose.
INSTRUCTIONS FOR USE Blender glass 1. Before first use, unpack the device and lay out all parts on a horizontal surface.
2. The cap, lid, cup, blades, and cup base are already installed on the motor. All parts except the motor must be disassembled for cleaning. See the CARE AND CLEANING section below.
3. Thoroughly wash and dry all parts, then assemble.
1) Place the blades into the glass. See Fig.1.
2) Place the base of the glass on the blades, holding the glass by the handle, fix the base of the glass in the bottom by turning the base counterclockwise until it stops, as shown in Fig.2
3) Place the lid on the glass. See Fig.3.
4) Place the cap on the lid and fix it by turning it as shown in Fig.4.
5) Place the assembled cup on the motor and secure it by turning it clockwise until it stops. (See Fig.5)
ATTENTION! The glass is now secured. Do not attempt to rotate the secured glass. | | | | | | | |
| | Before turning on, load the food into the glass. |
|
|
| | |
|
Operating procedure This unit has an LCD display that shows the total running time of 2 minutes for each selected speed.
Usage : 1. Place the ingredients to be mixed in the glass and close the lid. See Fig. 6. Make sure the cap is in place. When crushing ice or other solid ingredients, hold the lid in place with your hand.
Note: The volume of the mixture should not exceed the maximum volume of the glass (1500 ml)
2. Connect to the network, press the POWER button, after the beep the LCD display will turn on and “00” will appear. (See “
REMOTE CONTROL ”) The POWER button indicator will flash, the backlight of the other three buttons will turn on, the indicator of the default function – MIX – will appear.
3. Press the FUNCTION button to select the desired speed: MIX (1), CHOP (2), SLICK (3), LIQUID (4), PUREE (5) or ICE CRUSH. The selected setting will appear on the remote control, and the LCD display will show the total running time of 2 minutes for each setting.
4. Press the START/CANCEL button to start the device; the START/CANCEL button will begin flashing. The POWER button will stop flashing and the LCD display will begin counting down.
Note: During operation, you can press the PULSE button once to accelerate and again to cancel acceleration.
5. When the countdown is complete, i.e. the work is completed, a sound signal is emitted, the device stops automatically, i.e. the POWER button starts flashing, and the START/CANCEL button stops flashing and lights up steadily.
Note: During operation, if the desired effect has been achieved, you can press the START/CANCEL button to stop operation. The POWER light will begin flashing, and the START/CANCEL button will stop flashing and remain lit.
6. After use, press the POWER button to unplug the device.
Add ingredients through the cap hole as you work. |
|
Note: A minimum of 1 minute break is required between two consecutive cycles. Important: For faster or more thorough blending, use the PULSE button. For best results when crushing ice, use the ICE CRUSH function.
If you need to add ingredients during the process, remove the cap and add them through the opening. See Fig. 7.
To remove the glass, turn it as shown in Fig. 5. Remove the lid to remove the contents.
Recommendations: To make smoothies from fresh or frozen fruit, peel and core the fruit and cut into pieces.
To ensure better mixing of foods and liquids, pour the liquid into the glass first and then add the solids.
There are some tasks that cannot be performed effectively with a blender, such as: beating egg whites, whipping cream, mashing potatoes, kneading dough, and squeezing juice from fruits and vegetables.
To avoid spoilage, do not put bones or large pieces of hard food, such as turnips, into the blender.
To crush ice, use appropriately sized cubes. Hold the lid with one hand and use the ICE CRUSH function. To add more ice, remove the cap and add cubes one at a time through the hole in the lid.
CARE AND CLEANING Parts of this device are not user-replaceable. If servicing is necessary, contact a qualified technician. 1. Before cleaning, press the START/CANCEL button to complete all operations and press the POWER button to turn off the unit. Unplug the blender.
2. Always wash the blender after use. Don't let ingredients dry in the blender, as this will make cleaning difficult.
3. Pour some warm soapy water into the glass, turn on the PULSE button, then turn it off and pour the water out of the glass.
4. Disassemble all removable parts. Detach the assembled cup from the motor, then remove the cup base, take out the blades, and then remove the cap and lid.
5. Wash the cap, lid, glass, and base by hand or in the dishwasher, then dry. These parts are dishwasher safe, but the temperature should not exceed 70ºC.
6. Carefully clean the blades, then rinse under running water. Be careful not to touch the sharp edges.
Do not immerse the blades in water. Dry upside down, out of reach of children.
7. Wipe the motor housing with a damp cloth and dry. Remove stains with a damp cloth and a non-abrasive cleaner.
8. If liquid gets into the motor, first turn off the power to the device, then wipe it with a damp cloth and dry it thoroughly.
ATTENTION! 1) Do not immerse the motor in water to avoid the risk of electric shock. 2) Do not use hard sponges or harsh detergents to clean parts or coating. EXAMPLES OF MIXTURES| Function | Product | Volume | Operations |
| Acceleration | Breadcrumbs | 1 piece, cut into 8 pieces and ½ cup (125 ml) water | Acceleration 1–4 times |
| Cheese | 1 cup (250 ml) water and 2.5 cm pieces | Acceleration 5 times |
| Mix | Powdered milk | 1 cup (250 ml) of water and 10 g of dry milk | Continuous mixing, 20 sec |
| Chop | Meat, pulp, boiled | 30x30x50mm, only 300g | Continuous cutting, 2 minutes |
| Grind | Carrot | 720g water and 480g finely chopped carrots | Continuous grinding, 2 minutes |
| Liquid | Mandarin | 400g, without water | Continuous, LIQUID function, 2 minutes |
| Orange | 400g, cut into 4 parts, without water | Continuous, LIQUID function, 2 minutes |
| Egg yolk | 6 yolks | Continuous, LIQUID function, 2 minutes |
| Puree | Boiled potatoes | 480g boiled and chopped potatoes and 20g olive oil | Continuous, PUREE function, 30 sec |
| Kolka l'a | Ice cubes | 350g ice cubes | Automatic ice crushing until the operation is completed |
Buy Blender Gemlux GL-PB-888P by price 4899 грн
text_desc_seo_2
text_desc_seo_3
text_desc_seo_4
Our many years of experience and professionalism have earned us an excellent reputation in the Ukrainian food equipment market. Our competitive prices and product quality will delight you! Happy shopping.
